Loading ...
Loading ...
Loading ...
4
BEFORE THE FIRST USE
USING YOUR COFFEE MAKER
Check that all accessories are complete and the unit is not damaged. Add water into
water tank to the MAX level of water gauge and brew water for several times without
coffee grounds, then discard the water. Clean all detachable parts thoroughly with
warm water.
1. Open the top cover and fill the water tank with drinking water. The water level should
not exceed MAX level as indicated in the water tank.
2. Place the funnel into the funnel support, make sure it is assembled correctly, otherwise
the top cover cannot be closed. Place the nylon filter or a paper filter (10 cup) in the
funnel according to your preference.
3. Add coffee grounds into filter. Usually a cup of coffee need a level spoon of coffee
grounds, but you may adjust according to personal taste. Close the top cover completely.
4. Insert the thermal carafe on base horizontally.
5. Plug the power cord into the outlet. The LCD will display “AM12:00” together with the
“ : ” flickers.
6. Pres ON/OFF button, the red indicator will come on, The appliance will begin working.
7. The brewing process can be interrupted by pressing the ON/OFF button at any time,
and red indicator will go out. The appliance will continue brewing once ON/OFF is
pressed again.
You can take out thermal carafe, pour and serve at any time. The Note:
appliance will stop dripping automatically. But the time cannot exceed 30
seconds.
8. Remove out thermal carafe to serve when finish brewing (about one minute later after
the coffee stops dripping out.)
The coffee you get will less than the water you have added, as some Note:
water is absorbed by coffee grounds.
9. The appliance will be cut off power automatically at the completion of brewing. For an
optimum coffee taste, serve it just after brewing.
Loading ...
Loading ...
Loading ...