Loading ...
Loading ...
Loading ...
Problem solving guide
88
Problem Possible cause and remedy
F233 The cup rim sensor is not inserted or is incorrectly
inserted.
If the central spout is moving upwards and the cup
rim sensor is bumped, e.g. with a cup, the cup rim
sensor loses its reference position.
Confirm the message with OK.
Refit the cup rim sensor.
Cup detection is deactivated until the next time the
coffee machine is switched on and the central spout
remains in the highest position. Cup detection is
initialised again the next time the machine is switched
on.
F355, F357– F362 The bean system must be set up again, e.g. coffee
beans have possibly got jammed.
Open the appliance door and remove both bean
containers from the coffee machine.
Close the appliance door.
The bean system will be initialised.
Follow the instructions in the display.
Loading ...
Loading ...
Loading ...