GLA-1001 Owner’s Manual

Loading ...

10 10 Quart PowerXL Air Fryer Oven™

Using the Accessories

Using the Rotisserie Spit

1. With the Forks removed, force the Rotisserie Shaft through

the center of the food lengthwise.

NOTE: To support the food on the Rotisserie Spit better,

insert the Rotisserie Forks into the food

at different angles (see Fig. C).

2. Slide the Forks (A) onto each side of the Spit and secure

them in place by tightening the two Set Screws (B).

3. Hold the assembled Rotisserie Spit at a slight

angle with the right side higher than the left side

and insert the left side of the Spit into the Rotisserie

connection inside the appliance (see Fig. D).

4. With the left side securely in place, lower the right side of

the Spit into the Rotisserie connection on the right side of

the appliance (see Fig. E).

5. To remove cooked food, insert the large fork into the food,

twist left, and raise to remove the Spit from the left slot and

then remove the food from appliance with slight lifting

motion. Transfer the food to a carving board or serving

plate (see the "Removing the Rotisserie Spit" section).

Fig. D

Fig. E

Fig. C

Fig. F

Removing the Rotisserie Spit

1. Using the Fetch Tool, hook the bottom of the left

and right sides of the shaft attached to the Rotisserie Spit

(Fig. F).

2. Pull the Rotisserie Spit slightly to the right to disconnect the

accessory from the Rotisserie Socket.

3. Carefully pull and remove the Rotisserie Spit from the

appliance.

Loading ...

Owner’s Manual - Page 10