TAB8805/10 User Manual

Loading ...

English

Note

•

After connection, the product may perform a software

update. Upgrade is required after initial set up. Without

the upgrade, not all product features can be available.

• :KHQWKHÀUVWWLPHVHWXSLVQRWVXFFHVVIXOKROG

down the Wi-Fi button on soundbar for 8 seconds

until the second tone can be heard and the Wi-Fi light

is changed to slow pulse. Reset the Wi-Fi connection,

restart the app and start the set up again.

• If you want to change from one network to another,

you need to set up the connection again. Press hold

down the

(Wi-Fi) button on the soundbar for 8

seconds to reset the Wi-Fi connection.

WPS mode

If your router has Wi-Fi Protected Setup (WPS),

you can set up the connection without entering

a password.

1 Press and hold the Wi-Fi button for 4

seconds. You will hear a tone and the Wi-Fi

light will begin in double blink.

WPS

2 Press the WPS button

on your router.

The button is normally

marked with this WPS

logo.

3 Follow the instruction in Philips Sound

App powered by DTS Play-Fi to start the

pairing.

Note

•

WPS is not a standard feature on all routers. If your

router does not have WPS then use Standard Wi-Fi

Setup.

• Press the (Wi-Fi) button once if you want to

exit the WPS mode or it will automatically exit after 2

minutes.

8 After connection, this product may

perform a software update.

Upgrade to the latest software when

LWLV\RXUÀUVWWLPHVHWXS7KHVRIWZDUH

upgrade may take several minutes. Do not

unplug your speaker, turn off your device,

or leave the network during the update.

AirPlay setup

Use AirPlay to set up the Wi-Fi connection of

iOS device (iOS7 or later) and soundbar.

1 iOS device: Settings > Wi-Fi > select home

network [Play-Fi device (xxxxxx)]

2 Launch the Philips Sound App powered by

DTS Play-Fi. Follow the instructions in the

App to connect this product to your Wi-Fi

network.

» After successful Wi-Fi connection,

the Wi-Fi light indicatar on the front

cabinet will stop pulsing and turn solid.

Once you set up this product on your

Wi-Fi network, you can control it from

any smartphone or tablet on the same

network.

» When using the APP to play music, the

display panel will show PLAY-FI.

3 After connection, you can change the

device name. There are several names

to choose from or create your own by

choosing Custom Name at the end of the

name list. Otherwise, it follows the default

name.

4 After connection, this product may