Loading ...
Loading ...
Loading ...
7
US
Getting Started
About the indicators on the display
MEMORY
LCR
SL
S
SR
SW
LFE
D.RANGE
MONO
ST
COAX
HDMI
D
;
DTSOPT
PLII
CAT
;
PL
;
2134
5 6
8 97
qf qsqd q;qa
Name Function
A SW Lights up when the audio signal
is output from the SUB
WOOFER jack.
B LFE Lights up when the disc being
played back contains an LFE
(Low Frequency Effect)
channel and the LFE channel
signal is actually being
reproduced.
C ; D Lights up when the receiver is
decoding Dolby Digital signals.
Note
When playing a Dolby Digital
format disc, be sure that you
have made digital connections
and that INPUT MODE is set to
“AUTO” (page 70).
D ; PL/
; PLII
“; PL” lights up when the
receiver applies Pro Logic
processing to 2 channel signals
in order to output the center and
surround channel signals.
“; PLII” lights up when the
Pro Logic II Movie or Music
decoder is activated.
E OPT Lights up when INPUT MODE
is set to “AUTO” and the source
signal is a digital signal being
input through the OPTICAL
jack (page 70).
Name Function
F DTS Lights up when the receiver is
decoding DTS signals.
Note
When playing a DTS format
disc, be sure that you have made
digital connections and that
INPUT MODE is set to
“AUTO” (page 70).
G CAT Lights up when category mode
is set to “ONE CAT” during
XM Radio operation (page 60).
H MEMORY Lights up when a memory
function, such as Preset
Memory (page 54), etc., is
activated.
I Tuner
indicators
Lights up when using the
receiver to tune in radio stations
(page 52), etc.
J Preset
station
indicators
Lights up when using the
receiver to tune in radio stations
you have preset. For details on
presetting radio stations, see
page 53.
K D.RANGE Lights up when dynamic range
compression is activated (page
41).
L COAX Lights up when INPUT MODE
is set to “AUTO” and the source
signal is a digital signal being
input through the COAXIAL
jack (page 70).
continued
Loading ...
Loading ...
Loading ...