Loading ...
Loading ...
Loading ...
Maintenance Procedures
Maintenance Schedule
ACTION DAILY WEEKLY MONTHLY AS NEEDED
CLEAN
Upholstery X
Hand Grips X
WAX
Frames X
INSPECT
Paint X
Hardware X
Frame X
Hand Grips X
Clean
• Upholstery with an approved or compatible cleaner.
• Hand grips with an approved or compatible cleaner.
Wax
• Frames with a standard, non-abrasive, wax finish.
Inspect
• Hardware. Check for loosening. Tighten as required.
• Frames. Inspect for wear and damage.
• Handgrips. Check for wear and damage.
• For paint chips. Fill in immediately with manufacturers touch-up paint.
Once a Day
• Wipe down upholstery with a mild soap and water or comparable all purpose cleaner.
Once a Week
• Visually inspect all hardware for loosening, tampering or wear.
• Check condition of hand grips.
Once a Month
• Inspect hardware on all machines and tighten any bolts or nuts that may have loosened over the life of the product.
Notes
• Use polishing compound (such as car wax) and remove shoe from powder coated surfaces as necessary.
Approved and Compatible Cleaners
Two preferred cleaners have been approved by reliability experts: PureGreen 24 and Gym Wipes. Both cleaners will safely and
remove dirt, grime and sweat from equipment. PureGreen 24 and the Antibacterial Force formula of Gym Wipes are both
disinfectants that are against MRSA and H1N1.
PureGreen 24 is available in a spray which is convenient for gym to use. Apply the spray to a microfiber cloth and wipe down the
equipment. Use PureGreen 24 on the equipment for at least 2 minutes for general disinfection purposes and at least 10 minutes for
fungus and viral control.
Page 13 of 22
Loading ...
Loading ...
Loading ...