Loading ...
Loading ...
Loading ...
3. Install bolts, washers, and hex nuts securing pad support bracket to frame using an 8mm Allen wrench and a 17mm socket
wrench.
Item Description Qty.
1 Pad Support Bracket 1
2 Frame 1
3 M10 Hex Nylock Nut 2
4 3/8" Flat Washer 4
5 M10 x 100mm Bolt 2
Tighten bolts to 20-25 (27-33 Nm).
Install Pads
1. Slide collar and roller pad onto roller pads bar.
2. Install bolt and plate securing roller pad to roller pads bar using an 8mm Allen wrench.
Item Description Qty.
1 Roller Pads Bar 1
2 Collar 1
3 Set Screw 2
4 Roller Pad 1
5 Plate 1
6 M10 x 30mm Bolt 1
7 Bearing Housing Cap 1
Tighten bolts to 40-50 in-lb (4.5-5.5 Nm).
3. Tighten set screws in collar to 8-10 (11.13.5 Nm) using a 4mm Allen wrench.
4. Install bearing housing cap to roller pad using a rubber mallet.
5. Repeat steps to install other roller pad.
Page 9 of 22
Loading ...
Loading ...
Loading ...