Loading ...
Loading ...
Loading ...
34 35
Keep in mind that owers, bushes and surrounding shrubbery will change in size over a season.
Please keep sufcient space between boundary wire and other plants to avoid interference year-
around.
Marking out the Robomower's working area
You have now understood the basic principles of how the Robomower works. The next
step is to mark out the working area with boundary wire by referring to your garden plan.
This is a very important part of the installation, so please take care.
Starting from the charging station, the boundary wire must be one continuous loop without
any breaks or crossings. Connecting the end to the charging stations second connector
will complete the circuit.
Where appropriate, use the included ruler to check the 40 cm required distance.
Firstly, locate the best position for your charging station. Be aware that it needs a
permanent connection to the mains, so take into account the location of the nearest power
outlet.
> 1 m
> 2 m
The included supply cord has a length of 9 m.
The charging station (5) must be placed on a at surface, at ground level.
Both the front and back of the charging station must be accessible to the boundary wire. To
ensure the Robomower can return to the charging station smoothly, leave 2m of straight wire
to the front of the charging station and 1m to the side facing the cutting area. Use a shaded
location for the charging station, as a lower temperature while charging is benecial to the
battery.
Important: Place the charging station on an even, at surface away from ponds, pools or
stairs.
We recommend suitable protection from the elements, for example a robot port or garage.
Pay attention to protect cable!
ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS
Loading ...
Loading ...
Loading ...