Loading ...
Loading ...
Loading ...
7
2. Slide open the window plate assembly. Adjust their opening distance to
bring both ends of the assembly into contact with the window frame,
and x into place with screw.
1.3 Install the unit
1. Move the machine with installed heat hose and ttings near the
window. The distance between the unit and walls or other objects shall
be least 50cm (as shown in Figure 4)
2. Elongate the hose and snap the at end of the hose joints into the
elliptical hole of the window sealing plate assembly (as shown in Figure
5 and Figure 6) .
Notes:
1. the at end of the hose joints must be snapped into place.
2. The hose cannot be distorted nor has substantial turning
(greater than 45 °). Keep the ventilation of the hose unobstructed.
Figure 2 Figure 3
Figure 4
www.SereneLifeHome.com
Loading ...
Loading ...
Loading ...