Loading ...
Loading ...
Loading ...
13
2.1 Clean the upper lter screen frame
1. Clasp the wedging block of the EVA lter screen frame with hands. Force
down from the outside to remove the EVA lter screen frame. Unscrew 4
screws xing the EVA lter screen and rear housing to remove the EVA
lter screen (as image shown)
2. With vacuum cleaner, vacuum o all lint, and dander traped on lter.
3. Put the EVA lter screen into warm water with neutral detergent
(about 40°C/104°F) and dry it in the shade after rinsing clean.
2.2: Clean the lower lter screen frame
1. Hold the handle of the CON lter screen frame, and pull it outward
gently to remove it
2. Follow cleaning instructions listed on 2.1.2 above.
Postseason Storage
1. Unscrew the drainage cover, unplug the water plug, and discharge the
water in the internal water pan into other water containers or directly tilt
the body to discharge the water into other containers.
2. Turn on the machine, adjust it to low-wind ventilation mode, and
maintain this state until the drainage hose becomes dry, so as to keep
the inside of the body in a dry state and prevent it from mildewing.
3. Turn o the machine, unplug the power plug, and wrap the power cord
around the wrapping post; install the water plug and the drainage cover.
4. Remove the exhaust hose and keep it in safe place.
5. Cover the air conditioner with a plastic bag. Put the air conditioner in a
dry place, keep it out of the reach of children, and take dust control
measures. Ideally, store in original box.
6. Remove batteries of the remote control to prevent acid damage.
Note: Ensure that the unit is placed in a dry place and keep all machine
components properly stored.
www.SereneLifeHome.com
Loading ...
Loading ...
Loading ...