Loading ...
Loading ...
Loading ...
15
Copyright © 2016 – Secura Inc. - All rights are reserved. http://www.thesecura.com
CLEANING AND MAINTENANCE
• When you have fi nished using the Steam brush and iron
combination, make sure it is unplugged from the power socket
before you clean it.
• Allow the water in the appliance to cool for 15 minutes. Then
carefully remove the water- reservoir cap.
• Turn the appliance upside down to empty out all of the water.
• Clean the appliance and accessories only when they have
completely cooled. The cleaning brush is ideal for removing any
fl uff from the accessories.
• Store the appliance in a dry, safe place.
• Use only clean water. Straight tap water or a combination of
tap water and distilled water may be used in this appliance.
• Never put detergent, chemicals, salt, perfume, dye or any
other liquid (except water) into the water reservoir. Many of these
substances are highly fl ammable and may cause bodily harm,
while certain additives can corrode and clog the appliance’s
components. Never add essences to perfume the water.
• The only time anything but water should be used in this
appliance is when you are decalcifying it (see below).
Removing mineral deposits:
A common problem with steam irons is the accumulation of
mineral deposits in the tubes, and steam holes/outlets when
normal tap water is used to fi ll the iron. To reduce or lessen
the buildup of these mineral deposits, use distilled water, or a
combination of tap water and distilled water. The following steps,
if taken at least once a month, can reduce the level of mineral
buildup if distilled water cannot be used:
• Ensure the appliance is unplugged from the power and is
cool.
• Make a solution of 50% vinegar and 50% water. 60g is
enough.
Loading ...
Loading ...
Loading ...