Loading ...
Loading ...
Loading ...
13
Copyright © 2016 – Secura Inc. - All rights are reserved. http://www.thesecura.com
INSTRUCTION FOR USE
• Attach the appropriate accessory for the garment you wish to
iron/steam.
• Fill the appliance with water.
• Plug in the appliance, the heating indicator light will illuminate
when you have turned the temperature control knob to a level
that starts the heating process.
• Rotate the temperature gauge to the desired setting. The
temperature will be highest on the “MAX” setting and lower
between the “OFF” and the “.” setting.
NOTE: Temperature settings of "." or lower will not produce
steam.
• Wait for approximately one minute while the appliance heats
up. Press the steam release button for a burst of steam. As long
as your temperature setting is on high, "pumping" the button on
the handle can produce a more continuous fl ow of steam.
• Before applying steam to a garment, fi rst test the appliance
on an old piece of the same material to make sure steaming is
appropriate for this type of fabric.
• Move the Steam brush and iron combination over the whole
garment while pumping the steam-release button to release
steam evenly. The iron may be moved both horizontally and
vertically. For best results just touch the garment lightly with the
iron.
• If the appliance runs out of water before you have fi nished
steaming or ironing, allow it to cool completely before refi lling it.
Never use this appliance without fi lling it with water!
• While using the appliance, you will see that the power/
heating light indicator switches itself on and off. This is normal
and occurs when the appliance is adjusting to the optimum
temperature.
• If you fi nd the appliance begins to drip water from the steam
orifi ces while you are pumping the trigger, the heat is probably
not turned up high enough to turn the volume of water you are
Loading ...
Loading ...
Loading ...