Loading ...
Loading ...
Loading ...
6
Before First Use (Priming the Pump)
6
4
Turn the control knob back to the
STANDBY position.
Turn the control knob to the
STEAM
setting. Steam will
begin to flow from the steam
nozzle.
1
32
Plug in the unit and press the
ON/OFF button to turn unit
ON (I). The amber ON light will
illuminate.
The ready light will glow green
when the water is heated and unit
is ready for use. Place an empty
container under frothing nozzle in
order to catch any drips of water
from the steam nozzle.
Fill the removable water reservoir
to the MAX fill line with cold
water and replace securely on
the back of unit.
5
Allow steam to flow for about
2 minutes. NOTE: After the ready
light initially glows green, the
light may cycle on and off during
operation.
NOTICE: The water pump must be “primed” before
first use to work properly. Operating without water in
the reservoir can permanently damage the appliance.
Loading ...
Loading ...
Loading ...