Loading ...
Loading ...
Loading ...
13
CLEANING & OILING BLADES TRIMMER
BLADES
Clean with the included brush. For best results, put one or two
drops of Wahl Clipper Oil on the blades every time after the shaver
is rinsed. Motor bearings are permanently lubricated—do not
attempt to oil.
When oiling your trimmer, turn the trimmer “ON - I,” hold the unit
with the blades facing DOWN and squeeze one or two drops of oil
onto the blades. Wipe off excess oil with soft cloth.
NOTICE—DO NOT OVER OIL!
Excessive oiling or application of liquids will cause damage if
allowed to seep back into motor.
FOIL & BLADE CARE
Trimmer blades have precision-hardened, ground and lapped
cutting teeth. Foils, cutter bar, and blades should be handled
carefully and never bumped or used to cut dirty or abrasive
material.
STORAGE
Before storing your trimmer, use the cleaning brush to whisk any
loose hairs from the unit, foils, cutter bar, and blades. Store unit in
such a manner so that blades are protected from damage.
When the shaver is not in use, the shaver foil/blade guard
attachment should be in place to protect the blades.
This appliance should be stored in a manner where it is not
subjected to crushing, heating above 100°C (212°F), or
incineration.
CORD CARE
The cord should not be used to pull the shaver. Freedom of
movement needs to be maintained. Care should be used to keep
the cord untwisted and undamaged.
When stored, the cord should be coiled and replaced neatly in its
original package or storage pouch.
Loading ...
Loading ...
Loading ...