Loading ...
Loading ...
Loading ...
12
head, and rinsing the cutter bars.
This will allow any hairs still on
the cutter bars to be washed
away. Leaving the foil head on
while rinsing makes in more
difficult for hairs to be washed
clean.
TO REMOVE CUTTER BAR
Turn shaver off. Remove the foil head
and, holding the shaver in one hand,
gently pull up on cutter bar. Be sure your
thumb and first finger are positioned at
each end of the cutter bar.
WARNING: Handle cutting components
with care to avoid personal injury.
NOTE: If you do not hold the cutter bar as
shown, brushing the blades could result in
damage to the assembly.
When the foil head and cutter bars are
removed from the shaver, an alternate
cleaning method is to rinse them under
running water. Simply let them air dry.
After cleaning, replace the cutter bars by
pressing down gently. Carefully replace
the foil head, snapping it into place.
From time to time, depending on the
density of your beard, you will need to
replace the cutters and foils. If you notice
that it is taking you longer to shave, or if your face starts to feel
some irritation, or if the foil seems to become warm to the touch, it
is probably time to replace the cutters and foils. Replace the cutters
and foils only with WAHL parts (Yellow: 7045-100, Silver: 7045-400,
Black Chrome: 7045-700).
Loading ...
Loading ...
Loading ...