Loading ...
Loading ...
Loading ...
17
Cleaning Condenser
INTERVAL - EVERY SIX MONTHS
To maintain operational e ciency, keep the front grille free of dust
and lint, and clean the condenser when necessary. Depending on
environmental conditions, more or less frequent cleaning may be
necessary.
WARNING
!
Disconnect electric power to the unit before cleaning the
condenser.
NOTICE
DO NOT use any type of cleaner on the condenser unit.
Condenser may be cleaned using a vacuum, soft brush, or
compressed air.
1. Remove the grille. See GRILLE INSTALLATION).
2. Clean the condenser coil using a soft brush or vacuum
cleaner.
3. Install the grille.
Condenser
Extended Non-Use
VACATION/HOLIDAY, PROLONGED SHUTDOWN
The following steps are recommended for periods of extended
non-use:
1. Remove all consumable content from the unit.
2. Disconnect the power cord from its outlet/socket and leave it
disconnected until the unit is returned to service.
3. If any ice is visible inside the unit, allow ice to thaw naturally.
4. Clean and dry the interior of the unit. Ensure all water has
been removed from the unit.
5. The door must remain open to prevent formation of mold
and mildew. Open door a minimum of 2” (50 mm) to provide
the necessary ventilation.
Maintenance
WINTERIZATION
If the unit will be exposed to temperatures of 40
o
F (5
o
C) or less, the
steps above must be followed.
For questions regarding winterization, please call Viking Preferred
Service at (888) 845-4641.
CAUTION
!
Damage caused by freezing temperatures is not covered by the
warranty.
If you think your product is malfunctioning, read the CONTROL
OPERATION section to clearly understand the function of the
control.
If the problem persists, read the NORMAL OPERATING SOUNDS
and TROUBLESHOOTING GUIDE sections below to help you quickly
identify common problems and possible causes and remedies.
Most often, this will resolve the problem without the need to call for
service.
If you do not understand a troubleshooting remedy, or your product
needs service, contact Viking Preferred Service directly at (888) 845-
4641.
When you call, you will need your product Model and Serial
Numbers. This information appears on the Model and Serial number
plate located on the upper right or rear wall of the interior of your
product.
BEFORE CALLING FOR SERVICE
NORMAL OPERATING SOUNDS
IF SERVICE IS REQUIRED
Troubleshooting
All models incorporate rigid foam insulated cabinets to
provide high thermal e ciency and maximum sound
reduction for its internal working components. Despite this
technology, your model may make sounds that are
unfamiliar.
Normal operating sounds may be more noticeable because
of the unit’s environment. Hard surfaces such as cabinets,
wood, vinyl or tiled oors and paneled walls have a
tendency to re ect normal appliance operating noises.
Loading ...
Loading ...
Loading ...