Loading ...
Loading ...
Loading ...
6. Program end – removing the laundry
34
Program end
The program is finished when End/Anti-
Crease or End appears in the display.
The Start/Add laundry sensor light goes
out.
The tumble dryer will switch off auto-
matically 15minutes after the end of the
Anti-crease phase (with programs with-
out an Anti-crease phase it will switch
off 15minutes after the end of the pro-
gram).
Removing the laundry
Only open the door when the drying
process has finished. Otherwise, the
laundry will not be properly dried
through and cooled down.
Pull the door open at the side with
the orange marker.
Remove the laundry.
Items left in the dryer could be dam-
aged by over-drying when the dryer
is used the next time.
Always remove all items from the
drum.
Turn the program selector to the
position.
Remove the lint from the 2 lint filters
in the door opening: see “Cleaning
and care”, “Cleaning lint filters”.
Shut the door gently.
Empty the condensed water con-
tainer.
Tip: The condensed water can be used
for the Steam Care program. See “Con-
densed water container – Preparing the
condensed water container for the
Steam Care program”.
Drum lighting
The inside of the drum lights up so that
you don't forget any items of laundry
when you empty it.
The drum lighting switches off automat-
ically (energy saving).
Loading ...
Loading ...
Loading ...