Loading ...
Loading ...
Loading ...
18
799434
you can use the slider to set the power level. The pan recognition key (E1) is lit, but dimmed.
Automatic bridging of the cooking zones is possible across vertically adjacent cooking zones.
Automatic pan position recognition can be activated at any time for 10 seconds by pressing
the pan recognition key (E1). Automatic pan recognition and automatic cooking zone bridging
are only effective on the cooking zones that are not yet activated.
The cooking zone bridge function can be switched off by setting the power level to "0" or by
pressing the relevant deactivation key (O). The function can be used if the pan is already on
the cooking hob or if the cooking hob is empty.
If there is no pan on the cooking hob:
- Switch on the hob. All cooking zones are set to »0«.
- Place the pan on any cooking zone. »0« starts to flash on the cooking zone with the pan.
Now, you can use the slider to set the power level. The function automatically bridges the
cooking zones depending on the pan size.
- You may continue with the next pan, using the same procedure.
- This function allows you to set the power level faster. Simple place the pan on any cooking
zone and the zone will automatically recognize the pan.
If the pan is already on the cooking hob:
- Switch on the cooking hob.
- »'0« will flash on the display unit of the cooking zone with the pan on it. Now, you can use
the slider to set the power level.
- If there are several pans on the cooking zone, the appliance automatically continues with the
selection for the next zone. »0« will flash on the next cooking zone display unit.
If you press the cooking zone selection key, the automatic pan recognition is deactivated and
the appliance switches to manual settings mode.
During the first 10 seconds, automatic recognition can also be
deactivated in user settings using the Aut parameter.
Pan position recognition is activated
automatically 10 seconds after the appliance
is switched on. If there is a pan on the hob,
the pan recognition function will recognize its
position and automatically bridge the cooking
zones depending on the size of the pan. Two
adjacent cooking zones can be merged into
a single large cooking zone. Only the display
unit for the lower cooking zone remains active
and visible, displaying a flashing "0".
The separation line (P) disappears. Now,
E
OS E1O
D
P
PAN POSITION RECOGNITION WITH AUTOMATIC BRIDGING OF
COOKING ZONES (Only with some models.)
Loading ...
Loading ...
Loading ...