Loading ...
Loading ...
Loading ...
5
3. Installation Instruction
Step 1. Foot tubes installation
Accessories required: A short rear foot tube(6), a long front foot tube(3), four flat washers(12), four carriage bolts(11),
four cap nuts(13), a spanner(14)(Please refer to the illustration)
Pass the carriage bolts(reverse) through the holes in foot tube, then place the flat washer and tighten the cap nut with a
spanner. The other foot tube is installed in the same way
.
Step 2.Pedals installation
Accessories required: A left pedal(4), a right pedal(7), a spanner(14)(Please refer to the illustration)
Attach the right pedal to the right crank with the supplied spanner. Turn the right pedal right. Tighten it to the end and fix it.
Attach the left pedal by turning it to the left in the same way. Finally, install the pedal straps.
(Caution: All pedals and cranks have the“L”or“R”mark. The direction in which the pedal is tightened is also marked on
the crank. Do not mistake the direction when installing, or it will damage the crank)
Loading ...
Loading ...
Loading ...