Loading ...
Loading ...
Loading ...
7.
Install a new oil filter with the “OUT-SIDE”
mark facing out.
8.
Install the spring into the oil filter cover,
and then install a new gasket and oil filter
cover by tightening the oil filter cover
bolts.
Torque: 7 lbf·ft (10 N·m, 1.0 kgf·m)
9.
Install a new sealing washer onto the
drain bolt. Tighten the drain bolt.
Torque: 18 lbf·ft (24 N·m, 2.4 kgf·m)
10.
Fill the crankcase with the recommended
oil (2 P. 48, 2 P. 129) and install the oil fill
cap.
Required oil
When changing oil & engine oil
filter:
1.6 US qt (1.5 L)
When changing oil only:
1.5 US qt (1.4 L)
20171129155157_31KZZA500_enu_BOOK Page 68 Wednesday, November 29 2017 16:14:18 JST
Engine Oil u Changing Engine Oil & Filter
Maintenance
65
Continued
Spring
Oil filter cover bolts
Oil filter
Gasket
“OUT-SIDE” mark
Oil filter cover
Loading ...
Loading ...
Loading ...