Loading ...
Loading ...
Loading ...
PureSou rce
U l t r a 2
Ice & Water Filtration System
PureSou rce
U l t r a 2
Ice & Water Filtration System
PureSou rce
U l t r a 2
Ice & Water Filtration System
ICE AND WATER INSTALLATION
IMPORTANT
• Always fit the filter as per manufacturer’s instructions.
• If you need to replace water tube, only use approved water quality piping that meets the pressure requirements.
• Make sure your refrigerator is level to avoid uneven ice cubes.
• Replace filter at suggested intervals to avoid water/ice reduction and irregularities in taste.
• Remove and clean ice bin once a month, discarding unused ice cubes. This will ensure fresh, clean ice and smooth operation of
your ice maker.
• Clean and empty the dispenser drip tray regularly to avoid overflow.
WARNING
If you have not used the dispenser for some time, discard the first seven or eight cups of water and any ice that the ice maker
produces in the first 24 hours (contaminants could have settled in the water pipes).
Wa
t
er filter
The water filter is located at the top left side of the fresh food compar
tment.
Replacing the water filter
Y
ou should change the water filter every six months to ensure the
highest possible
water qualit
y
.
If your refrigerator has not been used for a period of time (during a house move for
example), change the filter before reinstalling the refrigerator.
It is not necessary to turn the water supply off to change the filter. Be ready to wipe up
any small amounts of water released during the filter replacement.
1
. Ensure that the ice maker is turned off (Diagram 1).
2. Remove the filter by turning anti-clockwise 180˚.
3. Slide the old water filter cartridge straight out of the housing and discard it.
(Diagram 2).
4. Unwrap the new filter cartridge and using the alignment guide, slide it gently into
filter housing until it stops against the filter connection at the back of the housing.
(Diagram 3).
5. Engage the filter by firmly rotating clockwise until the filter snaps into position (once
engaged the filter cannot be rotated further). (Diagram 4).
6. Press a drinking glass against the water dispenser while checking for any leaks at the
filter housing. Any spurts and sputters that occur as the system purges air out of the
dispenser system are normal.
7. After filling one glass of water, continue flushing the system for about four minutes.
8. Turn on the ice maker. (Diagram 5).
9. When the filter has been replaced press and hold the ‘Ice and Water’ button for three
seconds to reset the filter replace timer.
16 INSTALLATION
Diagram 1
Diagram 2
Diagram 3
Diagraammm
4
Diagram 5
Loading ...
Loading ...
Loading ...