Loading ...
Loading ...
Loading ...
Components
ASSEMBLY INSTRUCTIONS
1. Carefully turn the Main Body upside-
down on a scratch-free and stable
surface. Be careful to prevent
damage to the cosmetic finish or
your floor surfacing.
2. Align the 2 holes in the foot with the
2 holes in the base of the appliance.
3. Place screws in the centre of the
holes and screw in with a
screwdriver.
4. Repeat for other foot.
5. Turn the appliance the right way up.
Main Body x 1 Feet with Castors x 2
Screws x 4
Remote x 1
WARNING: Heater must not be used without the feet, castors, wheels
fitted.
This appliance has been supplied with ‘1 way screws’ for permanent
installation of the feet. This is a safety requirement for the New Zealand and
Australian market.
Loading ...
Loading ...
Loading ...