Loading ...
Loading ...
Loading ...
11
MAINTENANCE & CARE
General cleaning will help prolong the life and performance of your treadmill. Keep the unit clean and
maintained by dusting the components on a regular basis. Clean both sides of the Running Belt (No.
C11) to prevent dust from accumulating underneath the Running Belt (No. C11). Keep your running
shoes clean so that dirt from your shoes do not wear the Running Board (No. D09) and Running Belt
(No. C11). Clean the surface of the Running Belt (No. C11) with a clean damp cloth.
To better maintain the treadmill and prolong its life it is suggested that the machine be powered off for
10 minutes every 2 hours and fully powered off whenever not in use.
CENTERING THE RUNNING BELT:
Place the treadmill on level ground and set it at 3-5mph to check if the Running Belt (No. C11) drifts
from the center.
If the Running Belt (No. C11) drifts to the
right, turn the adjusting bolt on the right
side ¼ turn clockwise, then turn the left
adjusting bolt ¼ turn counter-clockwise. If
the Running Belt (No. C11)
does not
move, rep
eat this step until it centers.
Refer to Figure A.
If the Running Belt (No. C11) drifts to the
left,
turn the adjusting bolts on the left
side ¼ turn clockwise, then turn the right
adjusting bolt ¼ turn counter-clockwise. If
the Running Belt (No. C11)
does not
move, re
peat this step until it centers.
Refer to Figure B.
Over time the Running Belt (No. C11)
will loosen. To tighten the Running Belt
(No. C11) turn the Left & Right side
adjusting bolts one full turn clockwise,
check the tension of the Running Belt
(No. C11).
Continue this process until
Running Belt (No. C11) is at the correct
tension. Make sure to adjust both sides
equally to ensure correct belt alignment.
Refer to Figure C.
Loading ...
Loading ...
Loading ...