Loading ...
Loading ...
Loading ...
Connecting the speaker/
subwoofer output terminals
1 Use wire cutters or a utility knife to
strip the end of the speaker/subwoofer
wires to expose about 10 mm (3/8 in.) of
wire and then twist the wire.
Twist
10 mm (3/8 in.)
2 Connect the speaker/subwoofer wires
to the speaker/subwoofer output term-
inals.
Fix the wires securely with the terminal
screws.
1
3
2
1
5
4
1 Terminal screws
Tighten the screws with a 1.5 mm (1/8 in.)
hexagonal wrench for terminal screws of
the speaker and a 3 mm (1/8 in.) hexagonal
wrench for terminal screws of the subwoo-
fer.
2 Speaker wires
3 Speaker output terminals
4 Subwoofer wires
5 Subwoofer output terminals
Before installing the amplifier
WARNING
! To ensure proper installation, use the supplied
parts in the manner specified. If any parts
other than those supplied are used, they may
damage internal parts of the amplifier, or be-
come loose causing the amplifier to shut
down.
! Do not install in:
— Places where it could injure the driver or
passengers if the vehicle stops suddenly.
— Places where it may interfere with the dri-
ver, such as on the floor in front of the dri-
ver’s seat.
! Install tapping screws in such a way that the
screw tip does not touch any wire. This is im-
portant to prevent wires from being cut by vi-
bration of the car, which can result in fire.
! Make sure that wires do not get caught in the
sliding mechanism of the seats or touch the
legs of a person in the vehicle as short-circuit
may result.
! When drilling to install the amplifier, always
confirm no parts are behind the panel and
protect all cables and important equipment
(e.g. fuel/brake lines, wiring) from damage.
CAUTION
! To ensure proper heat dissipation of the ampli-
fier, ensure the following during installation:
— Allow adequate space above the amplifier
for proper ventilation.
— Do not cover the amplifier with a floor mat
or carpet.
! Place all cables away from hot places, such
as near the heater outlet.
! The optimal installation location differs de-
pending on the car model. Secure the ampli-
fier at a sufficiently rigid location.
! Check all connections and systems before
final installation.
! After installing the amplifier, confirm that the
spare tire, jack and tools can be easily re-
moved.
En
Connecting the units Installation
Loading ...
Loading ...
Loading ...