PACKAGE CONTENTS
• Remote Wireless Shutter Control with battery
• Lanyard
• Quick Setup Guide
FEATURES
USING YOUR REMOTE CONTROL
1 Pull the plastic insulation sheet out of your shutter
control before using it the first time.
2 Set your camera to IR mode. For instructions, see the
documentation that came with your camera.
3 Attach your camera to a tripod, or place it on a steady
surface like a shelf or table.
4 Point your shutter control directly at your camera’s IR
receiver, then press the shutter button on the front of
your shutter control. When your camera receives the
IR signal, it automatically focuses and takes a picture.
TROUBLESHOOTING
If your camera does not focus and take pictures:
• Make sure that your shutter control is within
16.4 ft (5 m) of the camera’s IR receiver.
• Make sure that your camera is in IR mode. See your
camera’s user manual to activate the IR mode.
• Make sure that your camera has an autofocus feature.
See your camera’s user manual to activate auto focus
(if available).
• Make sure that the battery for the shutter remote
control is not expired. Replace with a CR2025 battery
if necessary.
• Make sure the line of site between the transmitter and
the infrared receiver is not blocked by the lens or
other obstacles.
Before using your new product, please read these instructions to prevent any damage.
Plastic insulation
sheet
Battery holder
Shutter button
BATT.
QUICK SETUP GUIDE
Remote Wireless
Shutter Control for
Canon DSLR Cameras
NS-WSCC
Loading ...
