Loading ...
Loading ...
Loading ...
21
TROUBLESHOOTING YOUR MR. COFFEE
®
COFFEEMAKER
Your MR. COFFEE
®
Coffeemaker has been carefully
designed to give you many years of trouble-free service.
In the unlikely event that your new coffeemaker does
not operate satisfactorily, please review the following
potential problems and try the steps recommended
BEFORE you call an Authorized Sunbeam Service Center.
PROBLEM POSSIBLE CAUSE SOLUTION
THE “BREW
NOW”/ON LIGHT
DOES NOT LIGHT
UP
The appliance is
unplugged.
PLUG UNIT IN.
There’s a power
outage.
WAIT FOR POWER TO
BE RESTORED.
THE COFFEE IS
NOT BREWING
The appliance is
unplugged.
PLUG UNIT IN.
There’s a power
outage.
WAIT FOR POWER TO
BE RESTORED.
The water
reservoir is empty.
CHECK THE WATER
WINDOWS.
The filter basket
is not properly
inserted.
INSERT FILTER BASKET
CORRECTLY.
The decanter is
not placed all
the way on the
warming plate.
PLACE DECANTER
CORRECTLY ON
WARMING PLATE.
THE
COFFEEMAKER
ONLY BREWS
WATER
There are no
coffee grounds
in the filter
basket.
ADD THE DESIRED
AMOUNT OF COFFEE
TO THE FILTER.
20
Water Filtration Disk Replacement
Your water filtration disk will need to be replaced
once a month (approx. 30 brew cycles). If the machine
will not be in use for an extended period of time,
rinse the water filter with running water and clean the
coffeemaker before use.
Cleaning the Decanter
Hard water can leave a whitish stain on the decanter,
and coffee may then turn this stain brown.
To remove decanter stains:
1. Fill the decanter with a solution of equal parts
water and vinegar and let the solution stand in the
decanter for approximately 20 minutes.
2. Discard the solution, then wash and rinse the
decanter.
Do not use harsh abrasive cleaners that may scratch the
decanter, scratches may cause the decanter to break.
Loading ...
Loading ...
Loading ...