Loading ...
Loading ...
Loading ...
5
ASSEMBLY
Step 5
Console Mast & Computer Console
IMPORTANT
Be Careful not to pinch any of the wires while assembling
NOTE!
the Console Mast and Computer.
1.
Slide the Console Mast Cover (30) onto the Console Mast (6). See Fig. E1 and E2.
2.
Hold the Console Mast (6) close to the Bike Assembly and connect both wires; the 4 Pin Console
Mast Harness (38) to the Pulse Connect Harness (39), and the Brake Motor Assembly Cable (34-1)
to the 8 Pin Console Mast Harness (35).
3.
Slide the Console Mast (6) onto the Bike Assembly (1) being careful not to pinch any wires. Secure the
Console Mast (6) using three M8 x 16L Flat Head Allen Bolts (86). Tighten Bolts.
4.
Hold the Console Computer (21) close to the top of the Console Mast (6) and connect both
wires; the 4 Pin Console Mast Harness (38), and the Pin Console Mast Harness (35).
5.
.
6.
Step 6 Leveling the Bike
1.
SEE F1. There are Adjustable Levelers (44) under each end of the Rear Stabilizer (3) that need to be
E3E1 E2 E4
92
38
38
38
86
92
20
19
6
92
6
1
86
86
39
39
30
6
35
35
35
34-1
34-1
6
21
F1
44
3
44
Loading ...
Loading ...
Loading ...