Loading ...
Loading ...
Loading ...
9
o
peraTion
Temperature Display - Figure 4
In normal operation, the following settings will be
displayed:
• theaveragerefrigeratortemperature
• thewarmestfrozenfoodtemperature.
When starting up for the first time or when
the appliance is warm, dashes will appear
in the freezer temperature display until the
temperature in the freezer compartment is
32°F (0°C).
It will take between three and eight hours for the
required temperature, 0°F or 38°F (-18°C or 3°C) to
be reached and displayed permanently in the display,
depending on the ambient conditions and the tempera-
ture setting.
If F1 to F5 appears in the display, the appliance has a
fault. Have the fault number available when you contact
the customer service department.
Power Failure/Frost-control
Display - Figure 4
If the power failure LED is lit, this means the freezer
temperature has risen too high during the last few
hours or days due to a power failure. The freezer tem-
perature display flashes at the same time.
• IfyoutouchtheAlarm icon now, the highest tem-
perature registered during the power failure will be
displayed.
• Checkthequalityofthefoodincaseithasbecome
too warm or even defrosted.
• Thehighesttemperaturewillappearforapproxi-
mately one minute. After that, the actual temperature
in the freezer will reappear.
The display can be turned off by touching the Alarm
icon again.
Audible Alarm Signal - Figure 4
The audible alarm signal helps to protect frozen food
and to save energy.
Theaudiblealarmsignalisswitchedoffby touching
the alarm icon.
Audible door alarm
This sounds when the door has been left open for
longer than about 180 seconds. The sound switch-off
function is active as long as the door is left open. The
alarm automatically switches back to standby when the
door is shut.
Audible/visualtemperaturealarm
It always sounds if the freezer temperature is not low
enough. The temperature display and the alarm LED
flash at the same time.
This can be caused by:
- warm, fresh food being placed in the freezer;
- too much warm air from the outside entering when
re-arranging or removing frozen food,
- a fault in the appliance.
The temperature display will continue to flash until the
cause of the alarm has been rectified. It will then stop
flashing and light up continually. The audible warning
signal is now automatically reset.
SuperCool - Figure 4
Touching the SuperCool icon switches the refrigerator
compartment to maximum cooling. It is recommended
particularly if you wish to cool large quantities of food,
drinks, freshly baked goods or meals rapidly.
Turningon
Touch the SuperCool icon briefly so the LED turns
on. The refrigerator temperature will drop to its lowest
value.
IMPORTANT
The SuperCool function uses slightly more
energy. After approximately six hours, however,
the refrigerator switches back automatically to
normal energy-saving operation. If required, the
SuperCool function can be turned off sooner.
Turningoff
Touch the SuperCool icon again until the LED turns
off.
Loading ...
Loading ...
Loading ...