Loading ...
Loading ...
Loading ...
12
= Temperaturedisplaymode
You can choose the unit of temperature for the dis-
play in degrees Fahrenheit or degrees Celsius.
The factory setting is degrees Fahrenheit.
How to change the temperature display to
degrees Celsius
• ActivatethesetupmodebytouchingtheSuperFrost
icon for 5 seconds.
• Touchthefreezer compartment Down icon until
appears in the freezer temperature display.
• TouchtheSuperFrost icon
- the display shows
• TouchtheSuperFrost icon again
- the temperature reading is now displayed in
degrees Celsius.
• Exitsetupmodebytouchingthefreezercompart-
ment On/Off icon.
Note
To change the temperature display back to degrees
Fahrenheit, follow the steps above.
o
peraTion
= Display brightness
How to adjust the display brightness
• ActivatethesetupmodebytouchingtheSuperFrost
icon for 5 seconds.
• Touch the freezer compartment Down icon until
appears in the freezer temperature display.
• TouchtheSuperFrost icon
- the display shows
• Touchthefreezer compartment
Up/Down icons to select
0 = minimum to
5 = maximum brightness
• TouchtheSuperFrost icon at the desired value.
• Exitsetupmodebytouchingthefreezercompart-
ment On/Off icon.
= Waterquantityforicecubetray
If the ice cubes produced by the ice maker are too
small,theinflowingwaterquantitycanbeadjusted.
Howtoadjustthewaterquantity
• ActivatethesetupmodebytouchingtheSuperFrost
icon for 5 seconds.
• Touch the freezer compartment Down icon until
appears in the freezer temperature display.
• TouchtheSuperFrost icon
- the display shows
• Touchthefreezer compartment Up icon
once only so E 4 appears in the display.
IMPORTANT
Do not increase for more than one step. If the
adjusted value is too high, the ice cube tray of the
ice maker could overflow.
• TouchtheSuperFrost icon again.
• Exitsetupmodebytouchingthefreezercompart-
ment On/Off icon.
Check the ice cube size within the next days. If the ice
cubes are still smaller than desired, follow the steps
above again.
Setup Mode - Figure 6
Loading ...
Loading ...
Loading ...