Loading ...
Loading ...
Loading ...
English
Problem (Recording) Solution
Troubleshooting (continued)
Recordings are not occurring
as scheduled. New
recordings cannot be made.
The wrong TV channel was
decoded (recorded) after
you programmed a
recording using the VIDEO
Plus+ system.
The index screen ickers
when a DVD±R is inserted.
Picture is fuzzy and
brightness varies when
prerecorded video tapes.
– The TV channel you want to record is not stored or you
selected the wrong programme number. Check the TV channels
stored.
– You have to reset the timer recording after adjusted the clock
setting.
– You cannot use the recorder to duplicate copyright material
(DVDs or videotapes) onto a recordable DVD, “COPY PROT”
will be displayed.
– ‘VPS/PDC’ is turned on but ‘VPS/PDC time’ is wrong. Enter the
exact ‘VPS/PDC time’.
1) Enter the PlusCode programming number of the desired TV
channel.
2) Press OK to con rm.
3) Check the channel number in the {Ch.} input eld. If this does
not correspond to the desired TV channel, select this entry
eld and change the channel number.
4) Press OK to con rm.
– You can nalise the disc using the following function:
1) Press OPEN CLOSE on this recorder to open the disc tray.
2) Insert the disc but do not close the tray.
3) Hold down button number {4} on the remote control until
the tray closes. ‘FINALISING’ appears on the display panel.
4) If nalising has been successful, the Picture Index screen will
appear.
– This happens if you try to copy DVDs or video tapes that have
been copy-protected. Even though the picture on the TV is ne,
but the recording on the recordable DVD is faulty. This
interference is unavoidable with copy-protected DVDs or video
tapes.
– The recordable DVD has a limited recording lifetime, use a new
disc for recording.
87
dvdr5350H_UK_Eng2.indd 87dvdr5350H_UK_Eng2.indd 87 2005-10-10 11:00:45 AM2005-10-10 11:00:45 AM
Loading ...
Loading ...
Loading ...