Loading ...
Loading ...
Loading ...
29
5 Maintenance
Precondition:The start screen is displayed.
T Remove and empty the water tank.
T Fit the filter cartridge extension supplied on top of a CLARIS
Smart filter cartridge.
T Insert the filter cartridge with its extension into the water
tank.
T Turn the filter cartridge clockwise until it audibly clicks into
place.
T Fill the water tank with fresh, cold water and reinsert the
tank.
E The machine automatically detects that you have just inserted
the filter cartridge.
‘Saved’ appears briefly on the display.
‘Switch open’
T Place a receptacle (at least 300 ml) under the fine foam
frother.
T Turn the switch to thex position.
‘Filter is being rinsed’, water flows out of the fine foam
frother.
Rinsing of the filter stops automatically after approximately
300ml.
‘Switch close’ appears on the display.
T Turn the switch to the °position.
The start screen is displayed.
E If the filter is active, this is indicated by a blue filter symbol at
the bottom of the display.
E Once the filter cartridge stops working (depending on the
water hardness setting), the JURA will prompt you to change
the filter.
E CLARIS Smart filter cartridges are available from specialised
dealers.
Precondition:The start screen is displayed. The filter symbol at the
bottom of the display lights up red.
T Remove and empty the water tank.
T Turn the filter cartridge anticlockwise and remove it along
with the extension from the water tank.
Changing the filter
Loading ...
Loading ...
Loading ...