Loading ...
Loading ...
Loading ...
20
See the separate supplied Cinema Link instruction manual, p. 25.
Attention: the sound info on screen will not correspond with the actual sound reproduction.
Camera, Camcorder or Game
& Connect your camera, camcorder or Game as shown.
é Connect to VIDEO 2 and AUDIO L 3 for mono
equipment. For stereo equipment also connect
AUDIO R 3.
S-VHS quality with an S-VHS camcorder is obtained by
connecting the S-VHS cables with the
S-VIDEO input
1 and
AUDIO inputs 3.
Do not connect cable 1 and 2 at the same time.This
may cause picture distortion !
Headphone
& Insert the plug into the headphone socket L as shown.
é Press ¬ on the remote control to switch off the
internal loudspeakers of the TV.
The headphone impedance must be between 8 and 4000
Ohm.The headphone socket has a 3.5 mm jack.
In the Sound menu select
Headphone volume to adjust
the headphone volume.
VIDEO
3
2
1
S•V
IDEO
A
U
D
IO
To enhance the sound reproduction of your TV you can
connect an externally powered subwoofer (between 20 and
250 Hz).
& Connect the audio cable of the external subwoofer to
the
SUBWOOFER socket at the rear of your TV.
é Select Subwoofer in the Setup, General menu, p. 9.
“ Adjust the frequency of the external subwoofer to 100-
120 Hz (according to your personal preference) if
present on the subwoofer.
‘ Adjust the volume level of the external subwoofer,
presumed this control is present on the subwoofer.
See also the instruction manual of the external
subwoofer.
SUBWOOFER
Cinema Link surround receiver
Connect extra subwoofer
Multi channel Surround receiver
& Connect the audio cable to the multi channel Surround receiver
and to
AUDIO OUT L and R at the bottom of your TV 1.
é If you want the loudspeakers of your TV to act as centre
speaker, also connect an audiocable to the multi channel
Surround receiver and to the
CENTRE IN at the bottom of
your TV 2.
“ Select Centre Input On in the Source menu. See p. 10.
The loudspeakers of the TV will now only produce centre
sound, the loudspeakers connected to the audio receiver will
produce Surround Sound.The volume has to be controlled via
the multi channel Surround receiver.
Note: No sound will be heard when a TV channel or external source is
blocked via the Child lock menu (see p. 13).
2
CENTRE IN
AUDIO
OUT
L
R
1
Side connections
Loading ...
Loading ...
Loading ...