User Manual Rocketfish RF-HTS110 8Outlet Power Manager with Surge Protection and Noise Filtering Multi

Documents for Rocketfish RF-HTS110

The following documents are available:
User Manual Other Documents Photos
RF-HTS110 photo
8-outlet Power Manager with Surge
Protection and Noise Filtering
RF-HTS110
QUICK SETUP GUIDE
Congratulations on your purchase of this Rocketsh Power Manager
with surge protection and noise ltering.
Your power manager:
Reduces energy consumption to save environmental resources
and lower your electric bill
Provides surge protection for sensitive electronic devices
Incorporates noise ltering to provide clean” power that will
maximize the performance of your devices.
Features
1 Main power switch/circuit breaker – Controls power to all AC
outlets on the Power Manager, and allows the unit to be reset in
the event of a circuit overload (after the overload condition has
been resolved).
2 6 ft (1.8 m) Soft-Flex™ power cord with right-angle/o-set
plug – enables placement of the Power Manager in the desired
location, furniture to be placed as close as possible to the wall
and will not block the second AC outlet.
3 One master outlet - controls power to the ve
master-controlled outlets.
4 Five master-controlled outlets – automatically shut down to
conserve energy when the device plugged into the master
outlet is turned o.
5 Three AC adapter spaced outlets – accommodate bulky AC
adapter plugs.
6 Two always-on outlets – provide continuous power regardless
of Master/Master-controlled outlets state.
7 Power LED indicator - lights to indicate that the power
manager is receiving adequate power from the AC outlet.
8 Protected LED indicator - lights when the surge protection
feature is working properly. If this LED does not light or goes out,
the surge protection feature has reached full capacity and can
no longer absorb additional surges and spikes. The power
manager should be replaced if this light goes out.
9 Grounded LED indicator – Lights when a properly grounded AC
outlet is detected. If this LED does not light, we recommend that
you contact a certied, licensed electrician to inspect your wiring.
Loading ...