Loading ...
Loading ...
Loading ...
Other Information
97
Other Information
KDL-V26/32/40XBR1
2-662-199-12(1)
E:\Worker\mix\2662199121(101805)\01US09OTH.fm
masterpage:3 columns Right
General
Error icon is displayed The file is not a valid MPEG1 or JPEG format, or it is a
progressive JPEG (which is not supported).
The thumbnail is not DCF-compatible.
The file is a JPEG or an MPEG1, but the thumbnail is
unreadable.
The file is unreadable.
Problem Possible Remedies
Problem Possible Remedies
How to reset the TV to factory
settings
❑ Turn on the TV. While holding down the V button on the remote control, press the
POWER button on the TV. (The TV will turn itself off, then back on again.)
Release the V button.
WARNING: The Reset will clear all of your customized settings including
Parental Lock setting.
How to restore Video settings
to factory settings
❑ Select Reset setting option while in the Video setting (see page 71).
How to restore Audio settings
to factory settings
❑ Select Reset setting option while in the Audio setting (see page 74).
Cannot cycle through the other
video equipment connected to
the TV
❑ Be sure the Label Video Inputs option is not set to Skip (see page 85).
Cannot operate the setting ❑ If a setting option appears in gray, this indicates that the setting option is not
available.
Lost password ❑ On the password screen (see page 82), enter the following master password:
4357. The master password clears your previous password; it cannot be used to
temporarily unblock channels.
TIMER LED on front panel is
lit
❑ When lit, indicates that the timer is set (see page 90). When the timer is set, this
LED will remain lit even when the TV is turned off.
Digital cable box does not work ❑ If you are connecting a VCR and digital cable box using a splitter, as described on
page 34, you must use a special bi-directional splitter that is designed to work
with your digital cable box. Contact your cable provider for details.
Cannot record digital channels
to VCR
❑ Only analog channels can be recorded to your VCR.
TV cabinet creaks ❑ When the TV is in use, there is a natural rise in temperature, causing the cabinet to
expand or contract and may be accompanied by a slight creaking noise. This is not
a malfunction.
Loading ...
Loading ...
Loading ...