Loading ...
Loading ...
Loading ...
FP (E1.1) 03/2019 page 14/90
For disposal of the transport packing, see chap. 17.1.
Note on second-hand chambers (Ex-Demo-Units):
Second-hand chambers are chambers that have been used for a short time for tests or exhibitions. They
are thoroughly tested before resale. BINDER guarantees the technically flawless state of the chamber.
Second-hand chambers are marked as such with a sticker on the chamber door. Please remove the
sticker before commissioning the chamber.
3.2 Guidelines for safe lifting and transportation
The front castors of chambers size 720 can be blocked by brakes. Please move the chambers with
castors only when empty and on an even surface, otherwise the castors may be damaged. Respect the
advice for temporal decommissioning (chap. 17.2).
CAUTION
Sliding or tilting the chamber.
Damage to the chamber.
Risk of injury by lifting heavy loads.
Transport the chamber in its original packaging only.
Secure the chamber with transport straps for transport.
∅ Do NOT lift or transport the chamber using the door handle or the door.
∅ Do NOT lift chambers 400 and 720 by hand.
Lift chamber size 53 and 115 at its four lower corners with the aid of 2 people,
chamber size 240 with the aid of 4 people, and place it on a transport pallet with
wheels. Push the pallet to the desired site and then lift the chamber from the pallet at
its four lower corners.
Place chambers size 400 and 720 using technical devices (fork lifter) on the transport
pallet. Set the fork lifter only from the rear in the middle of the chamber. Make sure to
place all the lateral supports of the chamber on the forks.
∅ Transport chambers size 400 and 720 ONLY with the original transport pallet. Set the
fork lifter only to the pallet. Without the pallet the chamber is in imminent danger of
overturning.
• Permissible ambient temperature range during transport: -10 °C to +60 °C / 14 °F to 140 °F..
You can order transport packing and pallets for transportation purposes from BINDER Service.
3.3 Storage
Intermediate storage of the chamber is possible in a closed and dry room. Observe the guidelines for
temporary decommissioning (chap. 17.2).
• Permissible ambient temperature range during storage: -10 °C to +60 °C / 14 °F to 140 °F..
• Permissible ambient humidity: max. 70 % r.H., non-condensing
If following storage in a cold location the chamber is transferred to the installation site for start-up,
condensation may form. Wait at least one hour until the chamber has attained ambient temperature and
is completely dry.
Loading ...
Loading ...
Loading ...