Loading ...
Loading ...
Loading ...
English 9
Installation
Install Duct Covers
When using both upper and lower vent covers, push lower cover down
onto hood and lift upper cover to ceiling and install with two mounting
screws.
NOTE
For vented installations, the upper vent cover may be reversed to hide
slots.
A
B
C
D
C
A. Upper vent cover
B. Lower vent cover
C. 4.2 x 8 mm screws
D. Bracket
Secure the bottom of the duct with 2 - 4 x 8 mm screws.
Completing the Installation
For non-vented (recirculating) installations only.
1. Install charcoal lters over metal grease lter. See the “Range Hood
Care” Section.
2. Install the metal bafe lters. See the “Range Hood Care” section.
3. Check the operation of the range hood blower and light.
NOTE
To get the most efcient use from your new range hood, read the “Range
Hood Use” section.
Charcoal Filter
If the model is not vented to the outside, the air will be recirculated
through disposable charcoal lters that help remove smoke and odors.
The charcoal lters are clipped on the motor housing frame.
NOTE
To Reduce the Risk of Fire and Shock use only the charcoal lter
NK-AR050FNB/AA.
Charcoal lters are not included with the hood.
They must be ordered from your supplier or Samsung service center.
Order the needed kit specifying your hood model and width size.
The range hood is designed to remove smoke, cooking vapors, and odors from the cooktop area. For best results, start the hood before cooking and
allow it to operate several minutes after cooking is complete to clear all smoke and odors from the kitchen. The hood controls are located on the front
side.
A
D
C
B
A. Bafe lter
B. Bafe lter handle
C. Blower and light controls
D. LED lamps
Installation
Range Hood Description
Loading ...
Loading ...
Loading ...