Loading ...
Loading ...
Loading ...
62 Servicing Your Honda
Clutch System
Clutch Disc/Plate Installation
1. Coat the clutch discs with engine oil.
2. Install the eight clutch discs (1) and seven
clutch plates (2) alternately, starting with a disc.
(1) clutch discs
(2) clutch plates
3. Apply grease to the clutch lifter rod (3) ends.
4. Insert the clutch lifter rod into the mainshaft.
5. Apply engine oil to the needle bearing of the
clutch lifter.
6. Install the clutch lifter (4) onto the clutch
lifter rod.
(3) clutch lifter rod (4) clutch lifter
7. Install the clutch pressure plate (5).
8. Install the five clutch springs and clutch
spring bolts (6).
9. Tighten the bolts in a crisscross pattern in two
or three steps, to the specified torque:
9 lbf·ft (12 N·m, 1.2 kgf·m)
(5) clutch pressure plate
(6) clutch spring bolts/clutch springs
(7) O-ring (8) clutch cover
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
10. Apply oil to a new O-ring (7) and install in
the groove of the clutch cover (8).
11. Install the cover by tightening the cover bolts
A, and B in a crisscross pattern in two or
three steps to the specified torque:
7 lbf·ft (10 N·m, 1.0 kgf·m)
Loading ...
Loading ...
Loading ...