Loading ...
Loading ...
Loading ...
15
Intelligent Battery
The TB50 Intelligent Battery has a capacity of 4280 mAh, a voltage of 22.8 V, and a variety of
power management functions.
Battery Level Button
LED1
LED2
LED3
LED4
Intelligent Battery Functions
1. Battery Level Display: LEDs display the current battery level.
2. Auto-Discharging Function: The battery automatically discharges to below 70% of total
power when it is idle for more than 10 days to prevent swelling. To exit idle state, press the
Power Level button to check the battery level. It takes approximately three days to discharge
the battery to 65%. It is normal to feel moderate heat emitting from the battery during the
discharge process.
3. Balancing Function: Automatically balances the voltage of each battery cell when charging.
4. Overcharge Protection: Charging stops automatically when the battery is fully charged.
5. Temperature Protection: The battery will only charge when the temperature is between 41°-
113° F (5°-45° C).
6. Overcurrent Protection: Battery stops charging when high amperage (> 10 A) is detected.
7. Over-Discharge Protection: To prevent serious damage to the battery, current output will be
cut off when the battery cell is discharged to 2.8 V and not in use. To extend operating times,
overcharging protection is disabled as batteries discharge during usage. In this instance,
a battery voltage below 2 V may cause a safety hazard such as a re when charged. To
prevent this, the battery will not be able to charge if the voltage of a single battery cell is
below 2 V. Avoid using any batteries matching this description. Always be alert to avoid over-
discharging to prevent permanent battery damage.
8. Short Circuit Protection: Automatically cuts the power supply when a short circuit is detected.
9. Battery Cell Damage Protection: DJI Pro Assistant for Ronin displays a warning message
when detecting a damaged battery cell.
10. Sleep Mode: Sleep mode is entered to save power when the battery is not in use.
11. Communication: Battery voltage, capacity, current, and other relevant information is
provided to the gimbal.
Camera Page
Use this page to control camera recording and various other supported settings when a camera
control cable is attached.
Refer to the Ronin 2 User Manual for further details.
Loading ...
Loading ...
Loading ...