Loading ...
Loading ...
Loading ...
en Installation and connection
10
Aligning the drawers
You can align the drawer vertically:
1. Open the drawer as far as it will go and remove the
container.
2. Remove the middle screw on both sides.
Note: If you want to reset to the drawer factory
settings, retain the screws.
3. Loosen the upper screw on both sides.
Note: Do not remove screws.
4. Lift the drawer and remove the lower screw on both
sides.
5. Move the drawer upwards or downwards into the
required position and screw the bottom screw into
one of the available holes.
Note: The drawer can be adjusted by 1/16" (2 mm)
up and down.
6. Retighten all screws.
7. To check the position, close the drawer and correct
if necessary.
Loading ...
Loading ...
Loading ...