CHARGING YOUR PORTABLE
BATTERY
Fully charge your portable battery before using it for
the rst time. This will take about four hours.
1 Plug the small end of the included USB cable into
the portable battery’s micro USB port.
2 Plug the other end into a standard USB port on your
computer, car charger, or wall charger (not
included). The portable battery automatically
begins charging and the LED turns on.
Note: All four LEDs turn on when the portable battery is
fully charged.
CHARGING YOUR DEVICES
1 Plug the large end of the included USB cable into
the portable battery’s USB port.
2 Plug the other end into your device. The portable
battery automatically begins charging your device.
Note: If your device requires a dierent connector than the
one provided, use the cable that came with your device.
COMPATIBILITY
• Compatible with most mobile devices, including
iPhones.
• If your device requires a dierent connector, use
the cable that came with your device.
FEATURES
V2 ENGLISH 19-0511
SPECIFICATIONS
Performance will vary based on settings and environmental
conditions, and will decrease over time and use.
LEGAL NOTICES
Declaration of Conformity:
Brand name / model number: INSIGNIA NS-MB5K/NS-MB5K-C
This device complies with Part15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
Suppliers Name: Best BuyPurchasing, LLC. Suppliers Address
(USA): 7601 Penn Ave South, Richeld, MN55423 U.S.A.
Suppliers phone number: 1-877-467-4289.
FCC Caution:
Changes or modications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment.
FCC Statement:
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception,which can be
determined by turning the equipment o and on, the user is
encouraged to try and correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
ICES Statement
CAN ICES-3(B)/NMB-3(B)
ONE-YEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
For customer service, call U.S. and Canada
(1-877-467-4289) Mexico (01-800-926-3000)
www.insigniaproducts.com
iPhone is a trademark of Apple Inc., registered in the U.S. and other
countries.
INSIGNIA is a trademark of Best Buy and its aliated companies
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2019 Best Buy. All rights reserved.
PACKAGE CONTENTS
• Portable battery
• Micro USB charging / sync cable
• Quick Setup Guide
Before using your new product, please read
these instructions to prevent any damage.
QUICK SETUP GUIDE
Portable
Battery
NS-MB5K / NS-MB5KPSH /
NS-MB5KMBH / NS-MB5KSGH
SAFETY INFORMATION/CAUTION
• Do not expose your portable battery to heat, re, or water.
• Do not modify, disassemble, open, drop, crush, puncture,
or shred the internal battery.
• This is not a toy. Young children should be supervised to
make sure that they do not play with the portable battery .
• Do not charge devices while the portable battery is recharging.
• Recharge the portable battery if it has not been used for
more than 90 days.
• Risk of res and burns. Do not open, crush, heat above 140°F
(60°C), or incinerate. Follow the manufacturer’s instructions.
• Operation environment temperatures: 32~104°F (0~40°C)
This product is safe for regular use under normal conditions. As
with any device using electrical power, some situations may be
unsafe and injuries or damages could result. To minimize or
avoid unsafe conditions, read and follow the instructions before
using.
Dimensions (H × W × D)
Cable length
Input
Output
Power bank capacity
Built-in cell capacity
1.75 × 0.91 × 3.9 in.
(44.45 × 23.2 × 100 mm)
11.8 in. (300 mm)
5 V, 2 A
5 V, 2.1 A
2,900 mAh (5 V, 2.1 A)
5,000 mAh
WARNING
When using this product, basic precautions should always be
followed, including the following:
a) Read all the instructions before using the product.
b) To reduce the risk of injury, close supervision is necessary
when the product is used near children.
c) Do not put ngers or hands into the product.
d) Do not expose power bank to rain or snow.
e) Use of a power supply or charger not recommended or sold
by power pack manufacturer may result in a risk of re or
injury to persons.
f) Do not use the power bank in excess of its output rating.
Overload outputs above rating may result in a risk of re or
injury to persons.
g) Do not use the power bank that is damaged or modied.
Damaged or modied batteries may exhibit unpredictable
behavior resulting in re, explosion or risk of injury.
h) Do not disassemble the power bank. Take it to a qualied
service person when service or repair required. Incorrect
reassembly may result in a risk of injury to persons.
i) Do not expose a power pack to re or excessive temperature.
Exposure to re or temperature above 100°C may cause
explosion. The temperature of 100°C can be replaced by the
temperature of 212°F .
j) Have servicing performed by a qualied repair person using
only identical replacement parts. This will ensure that the
safety of the product is maintained.
k) Switch o the power bank when not in use.
4 LEDs = 75-100% power
3 LEDs = 50-75% power
2 LEDs = 25-50% power
1 LED = 5-25% power
Blinking LED = < 5% power
If none of the LEDs light, the battery
pack needs to be recharged.
Micro USB
USB
LED status button
Loading ...
