Loading ...
Loading ...
Loading ...
14
OPERATION
ENGLISH
PM Indicator Display
1. Press the Indicator button to check the density of PM10/PM2.5/PM1.0.
• Pressing the button repeatedly toggles through to check the density of PM10 → PM2.5 →
PM1.0 in turn. The selected density displays for 10 seconds before the display reverts to the
highest measured PM level.
2. Check the dust particle size LED indicators.
• PM density is displayed based on the dust density result with the highest contamination
level.
For example, if PM10 density is 100 (normal), PM2.5 is 50 (bad), and PM1.0 is 30 (normal),
the value for PM2.5 is displayed for PM density.
Air Quality Indicator Light
Overall indoor air quality is displayed as one of four colors depending on the contamination level
of PM10, PM2.5, PM1.0, and odors.
(contaminated) red → orange → yellow → green (clean)
• The color that the air quality indicator light displays is based on the worst level among PM10,
PM2.5, PM1.0, and odor.
Turbo Function
Use this function to set the air purifier at the highest setting for 30 minutes.
1. Press the button.
2. Press the Turbo button.
• The air purifier operates at the highest setting for 30 minutes and then returns to the
previous setting.
• If the Turbo function is selected while the air purifier is in the sleep mode, the PM density
display turns off after 3 seconds, the Turbo function operates for 30 minutes, and then the
product returns to the sleep mode.
1,MFL68181320,영영 2016. 10. 26. 영영 10:37 Page 14
Loading ...
Loading ...
Loading ...