Loading ...
Loading ...
Loading ...
User Manual 18
User Manual19
thecamera’sashcharge
LEDlight:
1.
Batterycharged:
Enough charge for at least 2
packsoflm.
TheashLEDwillblinkgreen
whilst charging between shots,
and will be solid green when
ready to shoot.
2.
Batterylow:
Enough charge for about
1packoflm.
TheashLEDwillblinkorange
whilst charging between shots,
and will be solid orange when
ready to shoot.
3.
Batteryempty:
No charge remaining.
Theash
led will blink red,
and the camera will cease to
operate until it is recharged.
A fully-charged OneStep 2
camera will have enough pow-
er to shoot 15-20 packs
oflm,dependingonusage.
To check the camera’s charge
at any time, switch the camera
off, then switch it back on
whilst holding down the
self-timerbutton.The8lm
counter LEDs on top of the
camera will light up, indicating
how much battery remains.
Forexample:If6LEDslight
up, that means the camera has
6/8 (75%) charge remaining.
Once you release the self-timer
button, the LEDs will return to
displaying the number of shots
remaininginyourlmpack.
Compatible Film
The OneStep 2 works with
all Polaroid Originals i-Type
and600typelmpacks.We
recommendusingi-Typelm
as it is optimized for use with
the OneStep 2.
Power supply
Charge the OneStep 2 before
use to ensure it has enough
power for the duration of your
shoot(see→Charge the Cam-
era).TheashchargeLEDwill
be solid red whilst the camera is
plugged in and charging, and will
turn off once the camera is fully
charged.
Attach the camera neck strap
See page 8 for guide to attach-
ing your neck strap.
Using a Tripod
The OneStep 2 has a tripod
socket in its base, which works
with most standard tripods.
Simply screw your tripod
mount into the socket on the
base of the OneStep 2.
Note With most tripods,
the tripod mount will need
to be unscrewed before
you can load or exchange
lmintotheOneStep2.
Cleaning the rollers
Sometimes excess developer
paste from photos may build
up on the camera’s rollers,
affecting the camera’s perfor-
mance and causing photos to
show unwanted imperfections.
The OneStep 2 has a built-in
roller cleaning mode to help
with this issue. Just follow
thesesteps:
1. Turn the camera off.
2. Openthelmdoor.
3. Holdtheashoverridebutton
and press the shutter button.
4. The camera is now in roller
cleaning mode.
5. Using a damp cloth or cotton
swab, gently clean the rollers.
6. Press shutter button to
incrementally advance roller
positions.
7. Once both rollers are clean on
allsides,closethelmdoor.
8. Rollers will automatically re-
turn to their correct position.
Troubleshooting
& FAQ
My OneStep 2 won’t eject
my photo/darkslide
Make sure that your OneStep 2
cameraischarged:Thecam-
era’sashchargeLEDwillblink
red if it doesn’t have enough
charge to operate. If this is
the case, you should recharge
your camera before using the
camera again.
Make sure you still have
lminyourcamera:tocheck,
slide the power switch off and
on.Theremaininglmcounter
LEDs will indicate how many
shotsyouhaveleftinthelm
pack.IftheLEDsashrapidly
when the the camera turns on
again, this means that there are
Loading ...
Loading ...
Loading ...