Loading ...
Loading ...
Loading ...
12
|
Wolf Customer Care 800.222.7820
COFFEE SYSTEM OPERATION
Cappuccino
1 Remove water spout (if installed).
2 Adjust the froth regulator on the milk container to the
desired amount. Refer to the chart and illustration below.
3 Fill with milk and insert the milk container. Refer to the
illustration below.
4 Place a cup under the coffee spout, then verify the milk
spout is positioned over the cup.
5 Press to initiate the cycle.
6 Once the cycle is complete, place a cup under the milk
spout, then press and hold CLEAN on the milk container
until the bar is complete.
7 Remove milk container and place in refrigerator.
FROTH
BEVERAGE AMOUNT
Caffelatte No Froth
Latte Macchiato Some Froth
Cappuccino Most Froth
ADJUSTING VOLUME
Refer to the chart below for the programmed volume of milk
and coffee for cappuccino. The maximum volume of milk is
limited to the volume in the container.
1 Insert the milk container.
2 Press until ‘MILK FOR CAPPUCCINO PROGRAM
QUANTITY’ is displayed, then release.
3 Once the desired volume of milk is dispensed, press .
4 After a few seconds unit will begin to dispense coffee
and ‘COFFEE FOR CAPPUCCINO PROGRAM QUAN-
TITY’ appears on the display.
5 Once the desired volume of coffee is dispensed,
press
. The new volume will be maintained until repro-
grammed or default settings are selected.
VOLUME
BEVERAGE MILK COFFEE
Cappuccino 2.4 oz (70 ml) 2.7 oz (80 ml)
FROTH
REGULATOR
RECEPTACLE
Froth regulator.
Milk container.
CLEAN
BUTTON
Loading ...
Loading ...
Loading ...