Loading ...
Loading ...
Loading ...
CARE & USE/INSTALLATION
|
7
This use & care manual covers the Lynx grill models listed below. Some features and options will vary based upon
the model that you purchased.
LYNX GRILL MODELS
USE & CARE GUIDELINES
1. Before each use, complete the checklist on page 21.
2. Make sure all burner control knobs are in the “OFF” position.
3. Push and hold the control knob in for 5 – 7 seconds, allowing the igniter to heat up.
4. Turn the knob to the “LITE” position.
5. After ignition set the knob to the desired setting.
HOW TO LIGHT YOUR ROTISSERIE BURNER
HOW TO LIGHT YOUR GRILL
Note: The rotisserie burner features a thermocouple sensor with a safety valve that automatically shuts off the
flow of gas if the burner goes out for any reason.
1. Before each use, complete the checklist below.
2. Make sure all burner control knobs are in the “OFF” position.
3. Push and hold the control knob for 5 – 7 seconds.
4. Turn the knob to the “LITE” position and continue to hold the knob in for an additional 30 – 60 seconds to allow
the thermocouple to heat up and keep the safety valve open.
BUILT-IN FREESTANDING
L30ATR L30ATRF
L36ATR L36ATRF
L42ATR L42ATRF
Loading ...
Loading ...
Loading ...