Samsung LH43QBREBGCXEN 43" UHD 4k Signage Monitor

User Manual - Transcript

• Page 1 - English - : Samsung Samsung owns the copyright for this manual Use or reproduction of this manual in parts or entirety without the authorization of Samsung is prohibited Trademarks other than Samsung are property of their respective owners QBR QB43R QB49R QB50R QB55R QB65R QB75R QB85R QB98R QER QE82R QMR QM32R QM43R QM49R QM50R QM55R QM65R QM75R QM85R QMRT QM32RT QM43RT QM55RT The colour and the appearance may differ depending on the product and the content in the manual is subject to change without prior notice to improve the performance Recommended hours of use per day for the QBR models except for QB98R QM32R and QER models is less than 16 hours If the product is used for longer than 16 hours a day the warranty may be void An administration fee may be charged in the following situations a An engineer is called out at your request but it is found that the product has no defect ie where the user manual has not been read b You bring the unit to a repair centre but it is found that the product has no defect ie where the user manual has not been read You will be informed of the administration fee amount before a technician visits Smart Signage User Manual By Model This manual provides information about your Smart Signage including supported types and product specications per model
• Page 2 - English - : Table of contents Preparations Checking the Components 3 Parts 4 QM32RQ43RQ49RQ50RQ55R Q65RQ75RQ85RQE82RQM32RT QM43RTQM55RT QB98R Antitheft Lock 6 Ports 7 Q43RQ49RQ50RQ55RQ65R Q75RQ85RQE82R QM32R QB98R QM32RT QM43RTQM55RT Control menu 12 Administrator menu Supported models QMRT 13 Precautions when handling the panel 14 Before Installing the Product Installation Guide 15 Tilting Angle and Rotation 15 Ventilation 15 Installing the Wall Mount 16 Preparing before installing WallMount 16 Installing the Wall Mount 16 Wall Mount Kit Specifications VESA 17 Specifications General 22 Preset Timing Modes 24 Appendix Licence 25 Using a touchscreen monitor Supported models QMRT Touchscreen monitor 18 Read below before using the product 18 Connecting the touch overlay 18 Connecting the touchscreen monitor 19 Connecting to a PC 19 Connecting to a laptop or tablet PC 19 Configuring the touchscreen monitor settings 20 Calibration 20
• Page 3 - English - : Preparations Chapter 01 quot Contact the vendor where you purchased the product if any components are missing quot The appearance of the components may differ from the images shown quot A stand is not provided with the product To install a stand you can purchase one separately quot The RS232C adapter can be used to connect to another monitor using the DSUB 9pin type RS232C cable Checking the Components Quick Setup Guide Warranty card Not available in some locations Regulatory guide Power cord Batteries AAA x 2 Not available in some locations Remote Control RS232C adapter HOLDERCABLE Supported models Q65R Q75R Q85R QB98R QE82R HolderRing x 4 Supported models Q43R Q49R Q50R Q55R Q65R Q75R QM43RT QM55RT TOUCH OUT cable x 2 Supported models QMRT
• Page 4 - English - : Parts QM32RQ43RQ49RQ50RQ55R Q65RQ75RQ85RQE82RQM32RT QM43RTQM55RT 25 m 25 m 30 30 Power button Power indicator Remote sensor 4 m Speaker quot The colour and shape of parts may differ from what is shown Specifications are subject to change without notice to improve quality Parts Description Remote sensor Press a button on the remote control pointing at the sensor on the front of the product to perform the corresponding function quot Using other display devices in the same space as the remote control of this product can cause the other display devices to be inadvertently controlled Power button Turns the product on or off Use the remote control within 25 m to 4 m from the sensor on the product at an angle of 30 from the left and right quot To enhance the IR receiver performance connect an external IR cable sold separately to the IR IN port
• Page 5 - English - : QB98R ONOFF Speaker Spacer logo Remote sensor amp Power button quot The colour and shape of parts may differ from what is shown Specifications are subject to change without notice to improve quality Parts Description Spacer logo Do not pull on the spacer logo using force The logo may tear or break off Remote sensor Press a button on the remote control pointing at the bottom of the product face to perform the function The remote control sensor is located on the bottom of the product quot Using other display devices in the same space as the remote control of this product can cause the other display devices to be inadvertently controlled To use remoteeco sensor make sure the sliding power button is protruding from the bottom of the product Power button To use the power button make sure the sliding power button is not protruding from the bottom of the product Use the remote control within 7 m to 10 m from the sensor on the product at an angle of 30 from the left and right quot To enhance the IR receiver performance connect an external IR cable sold separately to the IR IN port
• Page 6 - English - : Antitheft Lock quot An antitheft lock allows you to use the product securely even in public places quot The locking device shape and locking method depend on the manufacturer Refer to the user guide provided with your antitheft locking device for details quot The following images are for reference only Reallife situations may differ from what is shown in the images quot Supported model QB98R To lock an antitheft locking device Fix the cable of your antitheft locking device to a heavy object such as a desk Put one end of the cable through the loop on the other end Insert the locking device into the antitheft lock slot at the back of the product Lock the locking device An antitheft locking device can be purchased separately Refer to the user guide provided with your antitheft locking device for details Antitheft locking devices can be purchased at electronics retailers or online
• Page 7 - English - : Ports Q43RQ49RQ50RQ55RQ65R Q75RQ85RQE82R quot The colour and shape of parts may differ from what is shown Specifications are subject to change without notice to improve quality QM43R QM49R QM50R QM55R QM65R QM75R QM85R QE82R QB43R QB49R QB50R QB55R QB65R QB75R QB85R Port Description USB 1 10A Connect to a USB memory device quot The USB ports on the product accept a maximum constant current of 10A If the maximum value is exceeded USB ports may not work RJ45 Connects to MDC and the Internet using a LAN cable 10100 Mbps quot Use Cat7STP Type cable for the connection Shielded Twist Pair RS232C IN Connects to MDC using an RS232C adapter DVIMAGICINFO IN DVI IN Connects to a source device using a DVI cable or HDMIDVI cable MAGICINFO IN Connects to a network box using DPDVI cable to use Magicinfo DVI IN HDMI IN 1 ARC Connects to a source device using a HDMI cable or HDMIDVI cable HDMI IN 2 HDMI IN 2 DAISY CHAIN IN Connects to a source device using a HDMI cable or HDMIDVI cable Connects to another product using a HDMI cable DP IN DAISY CHAIN IN Connects to a PC using a DP cable HDMI OUT DAISY CHAIN OUT Connects to another product using a HDMI cable USB 205A Connect to a USB memory device quot The USB ports on the product accept a maximum constant current of 05A If the maximum value is exceeded USB ports may not work DVIHDMI AUDIO IN Receives sound from a source device via an audio cable AUDIO OUT Outputs sound to an audio device via an audio cable IR IN Connects to an external IR cable that receives signals from the remote control RS232C OUT Connects to MDC using an RS232C adapter
• Page 8 - English - : QM32R quot The colour and shape of parts may differ from what is shown Specifications are subject to change without notice to improve quality Port Description USB 1 10A Connect to a USB memory device quot The USB ports on the product accept a maximum constant current of 10A If the maximum value is exceeded USB ports may not work HDMI IN 1 ARC Connects to a source device using a HDMI cable or HDMIDVI cable RJ45 Connects to MDC and the Internet using a LAN cable 10100 Mbps quot Use Cat7STP Type cable for the connection Shielded Twist Pair RS232C IN Connects to MDC using an RS232C adapter HDMI IN 2 DAISY CHAIN IN Connects to a source device using a HDMI cable or HDMIDVI cable Connects to another product using a HDMI cable DP IN DAISY CHAIN IN Connects to a PC using a DP cable HDMI OUT DAISY CHAIN OUT Connects to another product using a HDMI cable USB 205A Connect to a USB memory device quot The USB ports on the product accept a maximum constant current of 05A If the maximum value is exceeded USB ports may not work AUDIO OUT Outputs sound to an audio device via an audio cable IR IN Connects to an external IR cable that receives signals from the remote control RS232C OUT Connects to MDC using an RS232C adapter
• Page 9 - English - : QB98R quot The colour and shape of parts may differ from what is shown Specifications are subject to change without notice to improve quality Port Description RJ45 Connects to MDC and the Internet using a LAN cable 10100 Mbps quot Use Cat7STP Type cable for the connection Shielded Twist Pair USB 1 10A Connect to a USB memory device quot The USB ports on the product accept a maximum constant current of 10A If the maximum value is exceeded USB ports may not work DVIMAGICINFO IN DVI IN Connects to a source device using a DVI cable or HDMIDVI cable MAGICINFO IN Connects to a network box using DPDVI cable to use Magicinfo RS232C IN Connects to MDC using an RS232C adapter RS232C OUT Connects to MDC using an RS232C adapter DVIHDMI AUDIO IN Receives sound from a source device via an audio cable HDMI IN 1 ARC Connects to a source device using a HDMI cable or HDMIDVI cable HDMI IN 2 DAISY CHAIN IN Connects to a source device using a HDMI cable or HDMIDVI cable Connects to another product using a HDMI cable DP IN DAISY CHAIN IN Connects to a PC using a DP cable HDMI OUT DAISY CHAIN OUT Connects to another product using a HDMI cable USB 205A Connect to a USB memory device quot The USB ports on the product accept a maximum constant current of 05A If the maximum value is exceeded USB ports may not work AUDIO OUT Outputs sound to an audio device via an audio cable IR IN Connects to an external IR cable that receives signals from the remote control
• Page 10 - English - : QM32RT quot The colour and shape of parts may differ from what is shown Specifications are subject to change without notice to improve quality Port Description USB 1 10A Connect to a USB memory device or TOUCH OUT cable quot The USB ports on the product accept a maximum constant current of 10A If the maximum value is exceeded USB ports may not work HDMI IN 1 ARC Connects to a source device using a HDMI cable or HDMIDVI cable RJ45 Connects to MDC and the Internet using a LAN cable 10100 Mbps quot Use Cat7STP Type cable for the connection Shielded Twist Pair RS232C IN Connects to MDC using an RS232C adapter HDMI IN 2 DAISY CHAIN IN Connects to a source device using a HDMI cable or HDMIDVI cable Connects to another product using a HDMI cable DP IN DAISY CHAIN IN Connects to a PC using a DP cable HDMI OUT DAISY CHAIN OUT Connects to another product using a HDMI cable USB 205A Connect to a USB memory device or TOUCH OUT cable quot The USB ports on the product accept a maximum constant current of 05A If the maximum value is exceeded USB ports may not work AUDIO OUT Outputs sound to an audio device via an audio cable IR IN Connects to an external IR cable that receives signals from the remote control RS232C OUT Connects to MDC using an RS232C adapter TOUCH OUT SCREEN Connect to a USB port on the product to use the touch function TOUCH OUT PC Connect to a USB port on a PC to use the touch function
• Page 11 - English - : QM43RTQM55RT quot The colour and shape of parts may differ from what is shown Specifications are subject to change without notice to improve quality Port Description USB 1 10A Connect to a USB memory device or TOUCH OUT cable quot The USB ports on the product accept a maximum constant current of 10A If the maximum value is exceeded USB ports may not work RJ45 Connects to MDC and the Internet using a LAN cable 10100 Mbps quot Use Cat7STP Type cable for the connection Shielded Twist Pair RS232C IN Connects to MDC using an RS232C adapter DVIMAGICINFO IN DVI IN Connects to a source device using a DVI cable or HDMIDVI cable MAGICINFO IN Connects to a network box using DPDVI cable to use Magicinfo HDMI IN 1 ARC Connects to a source device using a HDMI cable or HDMIDVI cable HDMI IN 2 DAISY CHAIN IN Connects to a source device using a HDMI cable or HDMIDVI cable Connects to another product using a HDMI cable DP IN DAISY CHAIN IN Connects to a PC using a DP cable HDMI OUT DAISY CHAIN OUT Connects to another product using a HDMI cable USB 205A Connect to a USB memory device or TOUCH OUT cable quot The USB ports on the product accept a maximum constant current of 05A If the maximum value is exceeded USB ports may not work DVIHDMI AUDIO IN Receives sound from a source device via an audio cable AUDIO OUT Outputs sound to an audio device via an audio cable IR IN Connects to an external IR cable that receives signals from the remote control RS232C OUT Connects to MDC using an RS232C adapter TOUCH OUT SCREEN Connect to a USB port on the product to use the touch function TOUCH OUT PC Connect to a USB port on a PC to use the touch function
• Page 12 - English - : Control menu quot The power button is located on the bottom of the product quot If you press the power button on the product when the product is turned on the control menu will be displayed Power off Source Press Move Press amp Hold Select Items Description Power off Power off the product With the control menu screen displayed briefly press the power button to move the cursor to Power off and then press and hold the power button to turn off the product Source Select the connected input source With the control menu screen displayed briefly press the power button to move the cursor to Source and then press and hold the power button to display the input source screen With the input source screen displayed press and hold the power button to switch to the desired input source quot The power button can only be used for Power off and Source quot To exit from the control menu screen wait for 3 seconds or more without pressing the power button
• Page 13 - English - : Administrator menu Supported models QMRT quot Touching and holding on the screen when the product is turned on displays the administrator menu quot If the touchscreen control is not available use the remote control to go to System Touch Control Touch Control and select On from the OSD menu quot If the administrator menu is not displayed use the remote control to go to System Touch Control Admin Menu Lock and select Off from the OSD menu quot This menu is not displayed when using touch mode on a connected PC Volume Home Menu Source Power Buttons Description Volume Adjust the Volume Select Volume from the administrator menu Home Enter Home screen Select Home from the administrator menu Menu Display the OSD menu To change settings select a menu item Select Menu from the administrator menu Source Select the connected input source Select an input source from the displayed list of input sources Select Source from the administrator menu Power Power off the product Select Power from the administrator menu
• Page 14 - English - : Precautions when handling the panel quot The colour and the appearance may differ depending on the model Do not stand the product as shown in the image The panel is fragile and can get damaged Lay the product down to handle it as shown in the image the packaging can be used quot Supported models 85 inches or more Ensure you use the handles on the back when moving the product quot Supported models 85 inches or more 15 mm Do not hold or grasp any area of the product within 15 mm from the front
• Page 15 - English - : Before Installing the Product Installation Guide To prevent injury this apparatus must be securely attached to the floorwall in accordance with the installation instructions Ensure that an authorised installation company installs the wall mount Otherwise it may fall and cause personal injury Make sure to install the specified wall mount Tilting Angle and Rotation quot Contact Samsung Customer Service Centre for further details The product can be tilted at a maximum angle of 15 from a perpendicular wall surface To use the product in Portrait mode rotate clockwise until the power indicator A or B is positioned as shown in the images below 15 A B A B quot Do not use this model installed on a ceiling floor or table Ventilation quot Contact Samsung Customer Service Centre for further details Installation on a Perpendicular Wall A Minimum 40 mm B Ambient temperature Under 35 C quot When installing the product on a perpendicular wall allow at least 40 mm of space between the product and wall surface for ventilation and ensure that the ambient temperature is kept below 35 C A B Installation on an Indented Wall A Minimum 40 mm B Minimum 70 mm C Minimum 50 mm D Minimum 50 mm E Ambient temperature Under 35 C quot When installing the product on an indented wall allow at least the space specified above between the product and wall for ventilation and ensure that the ambient temperature is kept below 35 C B D C D B C E A
• Page 16 - English - : Installing the Wall Mount A Preparing before installing WallMount To install a wallmount from another manufacturer use the HolderRing quot For the QM32RT QB85R QM85R and 82inch models that it does not provide HolderRingA Installing the Wall Mount The wall mount kit sold separately allows you to mount the product on the wall The provided image is only for reference For detailed information on installing the wall mount see instructions provided with the wall mount We recommend you contact a technician for assistance when installing the wall mount bracket Samsung is not responsible for any damage to the product or injury to yourself or others if you select to install the wall mount on your own
• Page 17 - English - : Wall Mount Kit Specications VESA quot Install your wall mount on a solid wall perpendicular to the floor To install the product on the other wall area contact the nearest agency If you install the product on a slanted wall it may fall and result in severe personal injury Samsung wall mount kits contain a detailed installation manual and all parts necessary for assembly are provided Do not use screws that are longer than the standard length or do not comply with the VESA standard screw specifications Screws that are too long may cause damage to the inside of the product For wall mounts that do not comply with the VESA standard screw specifications the length of the screws may differ depending on the wall mount specifications Do not fasten the screws too firmly This may damage the product or cause the product to fall leading to personal injury Samsung is not liable for these kinds of accidents Samsung is not liable for product damage or personal injury when a nonVESA or nonspecified wall mount is used or the consumer fails to follow the product installation instructions Do not mount the product at more than a 15 degree tilt Always have at least two people mount the product on a wall Four or more people for the 82inch size and larger models Standard dimensions for wall mount kits are shown in the table below Model Name VESA screw hole specs A B in millimetres Standard Screw Quantity QB43R QB49R QB50R QB55R QM32R QM43R QM49R QM50R QM55R QM32RT QM43RT QM55RT 200 200 M8 4 QB65R QB75R QM65R QM75R 400 400 QB85R QM85R QE82R 600 400 QB98R 900 600 quot Do not install your Wall Mount Kit while your product is turned on It may result in personal injury due to electric shock
• Page 18 - English - : Using a touchscreen monitor Supported models QMRT Chapter 02 Touchscreen monitor Control a PC by tapping the screen instead of using an input device such as a keyboard or mouse The touch screen functions by detecting a minute electric current that runs through your body capacitive Make sure to use the surface of your finger tip when tapping the screen Read below before using the product Take extra care to ensure an electrical substance does not contact the screen The screen may not function properly if there is static Do not press hard on the touchscreen with your finger tip Do not use a sharp object when tapping the screen The screen may break or get damaged Do not tap the screen while wearing a glove with a dirty finger or using something sharp such as your fingernail or a ballpoint pen The screen may not function properly Take extra care to ensure the screen does not contact moisture The touch sensor may not function properly Displaying a still image on the screen for an extended period of time may cause after images screen degradation or stains Switch off the screen when not in use Connecting the touch overlay quot Touch functions are not supported in applications other than the OSD menu and administrator menu Connect the TOUCH OUT cable between TOUCH OUT SCREEN and USB 1 10A or USB 205A port on the product TOUCH OUT SCREEN USB 1 10A USB 205A
• Page 19 - English - : Connecting the touchscreen monitor quot Connecting parts may differ in different products Connecting to a PC Connect your PC to the product using a HDMI or HDMIDVI cable Connecting the devices using a HDMI cable HDMI IN Connecting the devices using a HDMIDVI cable HDMI IN Connect the power cable from the product to the power outlet After the power supply is connected the product automatically detects and switches to the connected input source quot If the screen appears blank turn the product off and then on again Connect the TOUCH OUT PC port on the product to a USB port on the PC using the TOUCH OUT cable TOUCH OUT PC Connecting to a laptop or tablet PC A laptop or tablet PC can be connected to the product using the same method when connecting a desktop PC quot If touchscreen control is not available after the devices are connected Make sure to connect the HDMI or HDMIDVI cable before connecting the TOUCH OUT cable If touchscreen control is still unavailable after the cables are connected properly disconnect the TOUCH OUT cable and then connect it again
• Page 20 - English - : Conguring the touchscreen monitor settings To properly use the touch function of the product in Windows go to Tablet PC Settings and calibrate the product quot First connect the touchscreen monitor before configuring the following settings quot The maximum number of touchscreen monitors that can be connected simultaneously varies depending on the operating system and graphics card settings quot If Tablet PC Settings is not found in Control Panel search for Tablet PC Settings from Search Control Panel quot If used in a multiscreen setup make sure you have configured QMRT as the main display Calibration quot Instructions below are for Windows 8 The same method applies to both Windows 7 Windows 8 and Windows 10 quot After changing the Picture Size from the OSD menu you may need to calibrate the picture settings again quot Upon occurrence of an error during calibration go to Tablet PC Settings In the Display tab tap Reset and calibrate again In the Display tab select Setup under Configure Tap the page displayed on the product with your finger quot In dual monitor mode If the following page does not appear on the product press the Enter key to display the page Touch this screen to identity it as the touchscreen If this is not the Tablet PC screen press Enter to move to the next screen To close the tool press Esc
• Page 21 - English - : Select the product from Display under Display options Next select Calibrate Perform calibration following the onscreen instructions displayed as shown in the image To provide calibration samples tap the crosshair each time that it appears on the screen Rightclick anywhere on the screen to return to the last calibration point Press the Esc button to close the tool Do not change your screen orientation until you have completed the calibration process After calibration is complete the message Do you want to save the calibration data appears Select Yes Digitizer Calibration Tool Yes No Do you want to save the calibration data The touchscreen monitor has been calibrated successfully quot Selecting Reset will remove the calibration data
• Page 22 - English - : Specications Model Name QM32R QM32RT QB43R QM43R QM43RT QB49R QM49R QB50R QM50R Panel Size 32 CLASS 315 inches 801 cm 43 CLASS 425 inches 1 079 cm 49 CLASS 485 inches 1232 cm 50 CLASS 495 inches 1257 cm Display area 6984 mm H x 39285 mm V 941184 mm H x 529416 mm V 107378 mm H x 6040 mm V 109584 mm H x 61641 mm V Model Name QB55R QM55R QM55RT QB65R QM65R QB75R QM75R Panel Size 55 CLASS 546 inches 1387 cm 65 CLASS 645 inches 1639 cm 75 CLASS 745 inches 1893 cm Display area 12096 mm H x 6804 mm V 142848 mm H x 80352 mm V 165024 mm H x 92826 mm V Model Name QB85R QM85R QB98R QE82R Panel Size 85 CLASS 845 inches 2147 cm 98 CLASS 97 5 inches 2477 cm 82 CLASS 815 inches 2 0 71 cm Display area 18720 mm H x 10530 mm V 2158848 mm H x 1214352 mm V 180576 mm H x 101574 mm V Chapter 03 General
• Page 23 - English - : Model Name QM32R QM32RT QB43R QB49R QB50R QB55R QB65R QB75R QE82R QB85R QB98R QM43R QM49R QM50R QM55R QM65R QM75R QM43RT QM55RT QM85R Resolution Optimum resolution 3840 x 2160 60 Hz HDMI 3840 x 2160 60 Hz DisplayPort 1920 x 1080 60 Hz DVI 3840 x 2160 60 Hz HDMI 1920 x 1080 60 Hz DVI 3840 x 2160 60 Hz HDMI 3840 x 2160 60 Hz DisplayPort Maximum resolution Power Supply AC100240V 5060Hz Refer to the label at the back of the product as the standard voltage can vary in different countries Environmental considerations Operating Temperature 0 C 40 C 32 F 104 F For installing the enclosure keep the internal temperature at 40 C or below Humidity 10 80 noncondensing Storage Temperature 20 C 45 C 4 F 113 F Humidity 5 95 noncondensing Applicable before the product package is unpacked quot PlugandPlay This monitor can be installed and used with any PlugandPlay compatible systems Twoway data exchange between the monitor and PC system optimises the monitor settings Monitor installation takes place automatically However you can customise the installation settings if desired quot Due to the nature of the manufacturing of this product approximately 1 pixel per million 1ppm may appear brighter or darker on the panel This does not affect product performance quot This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel Using a resolution other than the specified resolution may degrade the picture quality To avoid this it is recommended that you select the optimum resolution specified for your product quot For detailed device specifications visit the Samsung website
• Page 24 - English - : Preset Timing Modes The screen will automatically be adjusted if a signal that belongs to the following standard signal modes is transmitted from your PC If the signal transmitted from the PC does not belong to the standard signal modes the screen may be blank with the power indicator on In such a case change the settings according to the following table by referring to the graphics card user manual quot DVI port is not supported on the QM32R QM32RT models Resolution Horizontal Frequency kHz Vertical Frequency Hz Pixel Clock MHz Sync Polarity HV Port DP IN DVI IN HDMI IN IBM 720 x 400 31469 70087 28322 O O O MAC 640 x 480 35000 66667 30240 O O O MAC 832 x 624 49726 74551 57284 O O O MAC 1152 x 870 68681 75062 100000 O O O VESA CVT 3840 x 2160RB 110500 49977 442000 O VESA CVT 3840 x 2160RB 133313 59997 533250 O VESA DMT 640 x 480 31469 59940 25175 O O O VESA DMT 640 x 480 37861 72809 31500 O O O VESA DMT 640 x 480 37500 75000 31500 O O O VESA DMT 800 x 600 37879 60317 40000 O O O VESA DMT 800 x 600 48077 72188 50000 O O O VESA DMT 800 x 600 46875 75000 49500 O O O VESA DMT 1024 x 768 48363 60004 65000 O O O VESA DMT 1024 x 768 56476 70069 75000 O O O VESA DMT 1024 x 768 60023 75029 78750 O O O VESA DMT 1152 x 864 67500 75000 108000 O O O VESA DMT 1280 x 720 45000 60000 74250 O O O VESA DMT 1280 x 800 49702 59810 83500 O O O VESA DMT 1280 x 1024 63981 60020 108000 O O O VESA DMT 1280 x 1024 79976 75025 135000 O O O VESA DMT 1366 x 768 47712 59790 85500 O O O Resolution Horizontal Frequency kHz Vertical Frequency Hz Pixel Clock MHz Sync Polarity HV Port DP IN DVI IN HDMI IN VESA DMT 1440 x 900 55935 59887 106500 O O O VESA DMT 1600 x 900RB 60000 60000 108000 O O O VESA DMT 1680 x 1050 65290 59954 146250 O O O VESA DMT 1920 x 1080 67500 60000 148500 O O O VESA DMT 2560 x 1440RB 88787 59951 241500 O O CTA861 7201440 x 576i 15625 50000 27000 O O CTA861 7201440 x 480i 15734 59940 27000 O O CTA861 720 x 576 31250 50000 27000 O O O CTA861 720 x 480 31469 59940 27000 O O O CTA861 1280 x 720 37500 50000 74250 O O O CTA861 1280 x 720 45000 60000 74250 O O O CTA861 1920 x 1080i 28125 50000 74250 O O CTA861 1920 x 1080i 33750 60000 74250 O O CTA861 1920 x 1080 27000 24000 74250 O O CTA861 1920 x 1080 28125 25000 74250 O O CTA861 1920 x 1080 33750 30000 74250 O O CTA861 1920 x 1080 56250 50000 148500 O O O CTA861 1920 x 1080 67500 60000 148500 O O O CTA861 3840 x 2160 54000 24000 297000 O CTA861 3840 x 2160 56250 25000 297000 O CTA861 3840 x 2160 67500 30000 297000 O O CTA861 3840 x 2160 112500 50000 594000 O O CTA861 3840 x 2160 135000 60000 594000 O O CTA861 4096 x 2160 54000 24000 297000 O CTA861 4096 x 2160 67500 30000 297000 O CTA861 4096 x 2160 112500 50000 594000 O CTA861 4096 x 2160 135000 60000 594000 O
• Page 25 - English - : Appendix Licence Chapter 04 Manufactured under license from Dolby Laboratories Dolby Dolby Audio Pro Logic and the doubleD symbol are trademarks of Dolby Laboratories The terms HDMI and HDMI HighDefinition Multimedia Interface and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries Open Source Licence Notice In the case of using open source software Open Source Licences are available on the product menu Open Source Licence Notice is written only English For information on the Open Source Licence Notice contact the Samsung Customer Centre or send email to ossrequestsamsungcom THIS PRODUCT IS SOLD WITH A LIMITED LICENCE AND IS AUTHORISED TO BE USED ONLY IN CONNECTION WITH HEVC CONTENT THAT MEETS EACH OF THE THREE FOLLOWING QUALIFICATIONS 1 HEVC CONTENT ONLY FOR PERSONAL USE 2 HEVC CONTENT THAT IS NOT OFFERED FOR SALE AND 3 HEVC CONTENT THAT IS CREATED BY THE OWNER OF THE PRODUCT THIS PRODUCT MAY NOT BE USED IN CONNECTION WITH HEVC ENCODED CONTENT CREATED BY A THIRD PARTY WHICH THE USER HAS ORDERED OR PURCHASED FROM A THIRD PARTY UNLESS THE USER IS SEPARATELY GRANTED RIGHTS TO USE THE PRODUCT WITH SUCH CONTENT BY A LICENSED SELLER OF THE CONTENT YOUR USE OF THIS PRODUCT IN CONNECTION WITH HEVC ENCODED CONTENT IS DEEMED ACCEPTANCE OF THE LIMITED AUTHORITY TO USE AS NOTED ABOVE