Sun Joe SPX9007-PRO Commercial Series 1800 PSI 1.6 GPM Max 2.41 HP Brushless Induction Motor Electric Pressure Washer

User Manual - Page 7

For SPX9007-PRO.

PDF File Manual, 20 pages, Read Online | Download pdf file

SPX9007-PRO photo
Loading ...
Loading ...
Loading ...
Unpacking
Carton Contents
Electric pressure washer
Spray wand
Trigger gun
Detergent tube with nozzle
Oil measuring plug
Five (5) Quick-Connect nozzles (0º, 15º, 25º, 40º and Soap)
Needle clean-out tool (included with manual packet)
High-pressure hose
Manuals with registration card
1. Carefully remove the pressure washer and check to see
that all of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you nd damaged or
missing parts, DO NOT return the unit to the store. Please
call the Snow Joe
®
+ Sun Joe
®
customer service center at
1-866-SNOWJOE (1-866-766-9563).
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use your new electric
pressure washer. The packaging is made of recyclable
materials. Properly dispose of these materials in
accordance with local regulations.
IMPORTANT! The equipment and packaging material are not
toys. Do not let children play with plastic bags, foils, or small
parts. These items can be swallowed and pose a
suocation risk!
mWARNING! Do not connect to power supply until
assembly is complete. Failure to comply could result in
accidental starting and possible serious personal injury.
Assembly
m
IMPORTANT! Before starting, remove the oil inlet nut
on top of the pump and replace with the oil measuring plug.
1. Flip up the pump cover to expose the oil inlet nut. Use a
wrench to loosen and remove the oil inlet nut by twisting it
counterclockwise (Fig. 1).
2. Insert the provided oil measuring plug and secure in place
by twisting it clockwise (Fig. 2).
NOTE: Be sure to retain the oil inlet nut in event that the
pressure washer needs to be transported.
NOTE: Use the oil inlet nut when transporting the pressure
washer. Before using the pressure washer again, you must
reinstall the oil measuring plug.
3. Fit the spray wand into the trigger gun and rotate it until
the two parts are completely locked (Fig. 3).
Fig. 1
Pump cover
Oil inlet nut
Fig. 2
Oil
measuring
plug
Fig. 3
Spray wand
Trigger gun
7
Loading ...
Loading ...
Loading ...