Sun Joe SPX9007-PRO User Manual

Loading ...

2. Wait until the waste oil is drained completed from the

pump. Tilt the machine if needed to speed up the

draining process.

3. When the waste oil is completely drained, replace the oil

draining nut and tighten securely.

4. Flip up the pump cover and use your hand to loosen

and remove the oil measuring plug by screwing it

counterclockwise. Fill in the new pump oil from the oil inlet

(Fig. 18).

5. Check the oil level with the oil measuring plug. Make sure

the oil level is above the MIN on plug (Fig. 18).

NOTE: If the oil is less than MIN, please add the oil and

check the oil level through the oil level window on the

side of the pump, until the oil reaches the red dot on the

window (Fig. 19).

Clean the Adapter Filter and the Nozzle

1. To ensure good performance, check and clean the adapter

lter (Fig. 20). Remove the lter and rinse with warm water

to prevent any foreign matter from clogging the pump

(Fig. 21).

2. Clean the nozzle with the needle clean-out tool provided

(Fig. 22). Remove the spray wand from the gun; remove

any dirt from the nozzle hole and rinse.

Fig. 17

Oil draining nut

MIN. oil

level

Fig. 18

Oil measuring plug

Oil inlet

Fig. 19

Oil level window

Do not

pass the

red dot

Fig. 20

Adapterlter

Garden hose adapter

Fig. 21

Filter

Loading ...

Sun Joe SPX9007-PRO Commercial Series 1800 PSI 1.6 GPM Max 2.41 HP Brushless Induction Motor Electric Pressure Washer