Loading ...
Loading ...
Loading ...
TURN OFF POWER
Turn off power at the circuit breaker or remove
fuses to the cooktop branch circuit.
CONNECT TO JUNCTION BOX
With the cooktop in place, open the cabinet
door and complete the electrical connections
to the junction box. When making the wire
connections, use the entire length of conduit
provided. The conduit must not be shortened.
CONNECT LEADS
Connect the red and black leads from the
cooktop conduit to the corresponding leads
in the junction box.
ELECTRICAL CONNECTIONS
6
Installation Instructions
D
D2
D4
D1
Ground
Red
Black
INSERT WIRES
Insert the wires from the conduit through the
opening of the junction box.
D3
Red
Ground wire
location
Black
SECURE WIRES TOGETHER
Once the connections are made, secure the
wires together using wire nuts.
D5
GROUNDING INSTRUCTIONS:
The bare ground wire in the conduit is
connected to the cooktop frame.
If connecting to a 4-conductor branch circuit,
installing in a mobile home or recreational
vehicle, or if local codes do not permit
grounding through the neutral white lead, attach
the appliance grounding lead (green or copper)
to the residence grounding conductor (green or
bare copper) in accordance with local codes.
When connecting to a 3 conductor branch circuit,
if local codes permit, connect the bare ground
connector lead of the cooktop to the branch
circuit neutral (gray or white in color).
IMPORTANT: If the cooktop is
being installed into a blind counter
(one with no cabinet opening below),
wire connections must be made before putting
the cooktop into the cutout opening.
Red
Black
Ground
Strain relief
clamp
Loading ...
Loading ...
Loading ...