Loading ...
Loading ...
Loading ...
Servicing Your Honda 77
Valve Clearance
4. Check the clearance of both valves by
inserting a feeler gauge (7) between the
adjusting screw (8) and the valve stem.
Clearance should be:
Intake: 0.002 in (0.05 mm)
Exhaust: 0.002 in (0.05 mm)
5. If it is necessary to make an adjustment,
loosen the adjusting screw lock nut (9) and
turn the adjusting screw so there is a slight
resistance when the feeler gauge is inserted.
After completing the adjustment, tighten the
adjusting screw lock nut while holding the
adjusting screw to prevent it from turning.
Finally
, recheck the clearance to make sure
that the adjustment has not been disturbed.
6. Install the left crankcase cover.
7. Install and tighten the bolts A, bolt B and
adjusting hole caps.
(7) feeler gauge
(8) adjusting screw
(9) adjusting screw lock nut
LEFT SIDE
(7)
(8)
(9)
Loading ...
Loading ...
Loading ...