Loading ...
Loading ...
Loading ...
Basic Operation & Riding 33
Starting & Stopping the Engine
2. With the throttle slightly open, operate the
kickstarter. Kick from the top of the stroke
through to the bottom with a rapid,
continuous motion.
NOTICE
Allowing the kickstarter to snap back freely
against the pedal stop can damage the engine
case.
3. Immediately after the engine st
arts, push the
choke lever down to the detent position (B).
4. About 15 seconds after the engine starts,
push the choke lever down all the way to
fully OFF (C).
5. If idling is unstable, open the throttle slightly.
High Air Temperature
35°C (95°F) or above
1. Do not use the choke.
2. Start the engine following step 2 under
Normal Air Temperature.
Low Air Temperature
10°C (50°F) or below
1. Follow steps 1 – 2 under Normal Air
Temperature.
2. Warm up the engine by opening and closing
the throttle slightly.
3. Continue warming up the engine until it idles
smoothly and
responds to
the throttle with
the choke lever (1) OFF (C).
NOTICE
Extended use of the choke may impair piston
and cylinder wall lubrication and damage the
engine.
Loading ...
Loading ...
Loading ...